lkml.org 
[lkml]   [2013]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/3] arm64: add EFI stub
    Date
    This patch adds PE/COFF header fields to the start of the Image
    so that it appears as an EFI application to EFI firmware. An EFI
    stub is included to allow direct booting of the kernel Image. Due
    to EFI firmware limitations, only little endian kernels with 4K
    page sizes are supported at this time. Support in the COFF header
    for signed images was provided by Ard Biesheuvel.

    Signed-off-by: Mark Salter <msalter@redhat.com>
    Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
    CC: Catalin Marinas <catalin.marinas@arm.com>
    CC: Will Deacon <will.deacon@arm.com>
    CC: linux-arm-kernel@lists.infradead.org
    CC: matt.fleming@intel.com
    CC: linux-efi@vger.kernel.org
    CC: Leif Lindholm <leif.lindholm@linaro.org>
    CC: roy.franz@linaro.org
    ---
    arch/arm64/Kconfig | 10 ++
    arch/arm64/kernel/Makefile | 3 +
    arch/arm64/kernel/efi-entry.S | 81 ++++++++++++
    arch/arm64/kernel/efi-stub.c | 280 ++++++++++++++++++++++++++++++++++++++++++
    arch/arm64/kernel/head.S | 112 +++++++++++++++++
    5 files changed, 486 insertions(+)
    create mode 100644 arch/arm64/kernel/efi-entry.S
    create mode 100644 arch/arm64/kernel/efi-stub.c

    diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
    index 809c1b8..10b0e93 100644
    --- a/arch/arm64/Kconfig
    +++ b/arch/arm64/Kconfig
    @@ -250,6 +250,16 @@ config CMDLINE_FORCE
    This is useful if you cannot or don't want to change the
    command-line options your boot loader passes to the kernel.

    +config EFI_STUB
    + bool "EFI stub support"
    + depends on !CPU_BIG_ENDIAN && !ARM64_64K_PAGES && OF
    + select LIBFDT
    + default y
    + help
    + This kernel feature allows an Image to be loaded directly
    + by EFI firmware without the use of a bootloader.
    + See Documentation/efi-stub.txt for more information.
    +
    endmenu

    menu "Userspace binary formats"
    diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
    index 5ba2fd4..1c52b84 100644
    --- a/arch/arm64/kernel/Makefile
    +++ b/arch/arm64/kernel/Makefile
    @@ -4,6 +4,8 @@

    CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
    AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
    +CFLAGS_efi-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET) \
    + -I$(src)/../../../scripts/dtc/libfdt

    # Object file lists.
    arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \
    @@ -18,6 +20,7 @@ arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o
    arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
    arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
    arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
    +arm64-obj-$(CONFIG_EFI_STUB) += efi-stub.o efi-entry.o

    obj-y += $(arm64-obj-y) vdso/
    obj-m += $(arm64-obj-m)
    diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
    new file mode 100644
    index 0000000..5f6d179
    --- /dev/null
    +++ b/arch/arm64/kernel/efi-entry.S
    @@ -0,0 +1,81 @@
    +/*
    + * EFI entry point.
    + *
    + * Copyright (C) 2013 Red Hat, Inc.
    + * Author: Mark Salter <msalter@redhat.com>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published by the Free Software Foundation.
    + *
    + */
    +#include <linux/linkage.h>
    +#include <linux/init.h>
    +
    +#include <asm/assembler.h>
    +
    +#define EFI_LOAD_ERROR 0x8000000000000001
    +
    + __INIT
    +
    + /*
    + * We arrive here from the EFI boot manager with:
    + *
    + * * MMU on with identity-mapped RAM.
    + * * Icache and Dcache on
    + *
    + * We will most likely be running from some place other than where
    + * we want to be. The kernel image wants to be placed at TEXT_OFFSET
    + * from start of RAM.
    + */
    +ENTRY(efi_stub_entry)
    + stp x29, x30, [sp, #-32]!
    +
    + /*
    + * Call efi_entry to do the real work.
    + * x0 and x1 are already set up by firmware. Current runtime
    + * address of image is calculated and passed via *image_addr.
    + *
    + * unsigned long efi_entry(void *handle,
    + * efi_system_table_t *sys_table,
    + * unsigned long *image_addr) ;
    + */
    + adrp x8, _text
    + add x8, x8, #:lo12:_text
    + add x2, sp, 16
    + str x8, [x2]
    + bl efi_entry
    + cmn x0, #1
    + b.eq efi_load_fail
    +
    + /*
    + * efi_entry() will have relocated the kernel image if necessary
    + * and we return here with device tree address in x0 and the kernel
    + * entry point stored at *image_addr. Save those values in registers
    + * which are preserved by __flush_dcache_all.
    + */
    + ldr x1, [sp, #16]
    + mov x20, x0
    + mov x21, x1
    +
    + bl __flush_dcache_all
    + /* Turn off Dcache and MMU */
    + mrs x0, sctlr_el1
    + bic x0, x0, #1 << 0 // clear SCTLR.M
    + bic x0, x0, #1 << 2 // clear SCTLR.C
    + msr sctlr_el1, x0
    + isb
    +
    + /* Jump to real entry point */
    + mov x0, x20
    + mov x1, xzr
    + mov x2, xzr
    + mov x3, xzr
    + br x21
    +
    +efi_load_fail:
    + mov x0, EFI_LOAD_ERROR
    + ldp x29, x30, [sp], #32
    + ret
    +
    +ENDPROC(efi_stub_entry)
    diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c
    new file mode 100644
    index 0000000..f000b04
    --- /dev/null
    +++ b/arch/arm64/kernel/efi-stub.c
    @@ -0,0 +1,280 @@
    +/*
    + * linux/arch/arm/boot/compressed/efi-stub.c
    + *
    + * Copyright (C) 2013 Linaro Ltd; <roy.franz@linaro.org>
    + *
    + * This file implements the EFI boot stub for the arm64 kernel.
    + * Adapted from ARM version by Mark Salter <msalter@redhat.com>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published by the Free Software Foundation.
    + *
    + */
    +#include <linux/efi.h>
    +#include <linux/libfdt.h>
    +#include <asm/sections.h>
    +#include <generated/compile.h>
    +#include <linux/uts.h>
    +#include <linux/utsname.h>
    +#include <generated/utsrelease.h>
    +#include <linux/version.h>
    +
    +/* error code which can't be mistaken for valid address */
    +#define EFI_ERROR (~0UL)
    +
    +/*
    + * EFI function call wrappers. These are not required for arm64, but wrappers
    + * are required for X86 to convert between ABIs. These wrappers are provided
    + * to allow code sharing between X86 and other architectures. Since these
    + * wrappers directly invoke the EFI function pointer, the function pointer
    + * type must be properly defined, which is not the case for X86. One advantage
    + * of this is it allows for type checking of arguments, which is not possible
    + * with the X86 wrappers.
    + */
    +#define efi_call_phys0(f) f()
    +#define efi_call_phys1(f, a1) f(a1)
    +#define efi_call_phys2(f, a1, a2) f(a1, a2)
    +#define efi_call_phys3(f, a1, a2, a3) f(a1, a2, a3)
    +#define efi_call_phys4(f, a1, a2, a3, a4) f(a1, a2, a3, a4)
    +#define efi_call_phys5(f, a1, a2, a3, a4, a5) f(a1, a2, a3, a4, a5)
    +
    +/*
    + * AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from
    + * start of kernel and may not cross a 2MiB boundary. We set alignment to
    + * equal max size so we know it won't cross a 2MiB boudary.
    + */
    +#define MAX_DTB_SIZE 0x40000
    +#define DTB_ALIGN MAX_DTB_SIZE
    +#define MAX_DTB_OFFSET 0x20000000
    +
    +#define pr_efi(msg) efi_printk(sys_table, "EFI stub: "msg)
    +#define pr_efi_err(msg) efi_printk(sys_table, "EFI stub: ERROR: "msg)
    +
    +struct fdt_region {
    + u64 base;
    + u64 size;
    +};
    +
    +/* Include shared EFI stub code */
    +#include "../../../drivers/firmware/efi/efi-stub-helper.c"
    +#include "../../../drivers/firmware/efi/fdt.c"
    +
    +static unsigned long __init get_dram_base(efi_system_table_t *sys_table)
    +{
    + efi_status_t status;
    + unsigned long map_size, desc_size;
    + unsigned long membase = EFI_ERROR;
    + efi_memory_desc_t *memory_map;
    + int i;
    +
    + status = efi_get_memory_map(sys_table, &memory_map, &map_size,
    + &desc_size, NULL, NULL);
    + if (status == EFI_SUCCESS) {
    + for (i = 0; i < (map_size / sizeof(efi_memory_desc_t)); i++) {
    + efi_memory_desc_t *desc;
    + unsigned long m = (unsigned long)memory_map;
    +
    + desc = (efi_memory_desc_t *)(m + (i * desc_size));
    +
    + if (desc->num_pages == 0)
    + break;
    +
    + if (desc->type == EFI_CONVENTIONAL_MEMORY) {
    + unsigned long base = desc->phys_addr;
    +
    + base &= ~((unsigned long)(TEXT_OFFSET - 1));
    +
    + if (membase > base)
    + membase = base;
    + }
    + }
    + }
    + return membase;
    +}
    +
    +unsigned long __init efi_entry(void *handle, efi_system_table_t *sys_table,
    + unsigned long *image_addr)
    +{
    + efi_loaded_image_t *image;
    + efi_status_t status;
    + unsigned long image_size, image_memsize = 0;
    + unsigned long dram_base;
    + /* addr/point and size pairs for memory management*/
    + u64 initrd_addr;
    + u64 initrd_size = 0;
    + u64 fdt_addr; /* Original DTB */
    + u64 fdt_size = 0;
    + unsigned long new_fdt_size;
    + char *cmdline_ptr;
    + int cmdline_size = 0;
    + unsigned long new_fdt_addr;
    + unsigned long map_size, desc_size;
    + unsigned long mmap_key;
    + efi_memory_desc_t *memory_map;
    + u32 desc_ver;
    + efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
    +
    + /* Check if we were booted by the EFI firmware */
    + if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
    + goto fail;
    +
    + pr_efi("Booting Linux Kernel...\n");
    +
    + /* get the command line from EFI, using the LOADED_IMAGE protocol */
    + status = efi_call_phys3(sys_table->boottime->handle_protocol,
    + handle, &proto, (void *)&image);
    + if (status != EFI_SUCCESS) {
    + pr_efi_err("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
    + goto fail;
    + }
    +
    + /*
    + * We are going to copy this into device tree, so we don't care where
    + * in memory it is.
    + */
    + cmdline_ptr = efi_convert_cmdline_to_ascii(sys_table, image,
    + &cmdline_size);
    + if (!cmdline_ptr) {
    + pr_efi_err("Failed to convert command line to ascii\n");
    + goto fail;
    + }
    +
    + status = handle_cmdline_files(sys_table, image, cmdline_ptr, "dtb=",
    + ~0UL, (unsigned long *)&fdt_addr,
    + (unsigned long *)&fdt_size);
    + if (status != EFI_SUCCESS) {
    + pr_efi_err("Failed to load device tree blob\n");
    + goto fail_free_cmdline;
    + }
    +
    + if (fdt_check_header((void *)fdt_addr)) {
    + pr_efi_err("Device Tree header not valid\n");
    + goto fail_free_dtb;
    + }
    + if (fdt_totalsize((void *)fdt_addr) > fdt_size) {
    + pr_efi_err("Incomplete device tree\n");
    + goto fail_free_dtb;
    + }
    +
    + dram_base = get_dram_base(sys_table);
    + if (dram_base == EFI_ERROR) {
    + pr_efi_err("Failed to get DRAM base\n");
    + goto fail_free_dtb;
    + }
    +
    + /* Relocate the image, if required. */
    + image_size = image->image_size;
    + if (*image_addr != (dram_base + TEXT_OFFSET)) {
    + image_memsize = image_size + (_end - _edata);
    + status = efi_relocate_kernel(sys_table, image_addr,
    + image_size, image_memsize,
    + dram_base + TEXT_OFFSET,
    + PAGE_SIZE);
    + if (status != EFI_SUCCESS) {
    + pr_efi_err("Failed to relocate kernel\n");
    + goto fail_free_dtb;
    + }
    + if (*image_addr != (dram_base + TEXT_OFFSET)) {
    + pr_efi_err("Failed to alloc kernel memory\n");
    + goto fail_free_image;
    + }
    + }
    +
    + status = handle_cmdline_files(sys_table, image, cmdline_ptr, "initrd=",
    + dram_base + 0x20000000,
    + (unsigned long *)&initrd_addr,
    + (unsigned long *)&initrd_size);
    + if (status != EFI_SUCCESS)
    + pr_efi("No initrd found\n");
    +
    + /*
    + * Estimate size of new FDT, and allocate memory for it. We
    + * will allocate a bigger buffer if this ends up being too
    + * small, so a rough guess is OK here. We increment the size
    + * by PAGE_SIZE since the firmware allocates by pages anyway.
    + */
    + new_fdt_size = fdt_size + EFI_PAGE_SIZE;
    + while (1) {
    + status = efi_high_alloc(sys_table, new_fdt_size, DTB_ALIGN,
    + &new_fdt_addr,
    + dram_base + MAX_DTB_OFFSET);
    + if (status != EFI_SUCCESS) {
    + pr_efi_err("No memory for new device tree\n");
    + goto fail_free_initrd;
    + }
    +
    + /*
    + * Now that we have done our final memory allocation, we can
    + * get the memory map key needed for exit_boot_services().
    + */
    + status = efi_get_memory_map(sys_table, &memory_map, &map_size,
    + &desc_size, &desc_ver, &mmap_key);
    + if (status != EFI_SUCCESS)
    + goto fail_free_new_fdt;
    +
    + status = update_fdt(sys_table,
    + (void *)fdt_addr, (void *)new_fdt_addr,
    + new_fdt_size, cmdline_ptr,
    + initrd_addr, initrd_size,
    + memory_map, map_size, desc_size, desc_ver);
    +
    + /* Succeeding the first time is the expected case. */
    + if (status == EFI_SUCCESS)
    + break;
    +
    + if (status == EFI_BUFFER_TOO_SMALL) {
    + /*
    + * We need to allocate more space for the new
    + * device tree, so free existing buffer that is
    + * too small. Also free memory map, as we will need
    + * to get new one that reflects the free/alloc we do
    + * on the device tree buffer.
    + */
    + efi_free(sys_table, new_fdt_size, new_fdt_addr);
    + efi_call_phys1(sys_table->boottime->free_pool,
    + memory_map);
    + new_fdt_size += EFI_PAGE_SIZE;
    + } else {
    + pr_efi_err("Unable to constuct new device tree\n");
    + goto fail_free_mmap;
    + }
    + }
    +
    + /* Now we are ready to exit_boot_services.*/
    + status = efi_call_phys2(sys_table->boottime->exit_boot_services,
    + handle, mmap_key);
    +
    + if (status != EFI_SUCCESS) {
    + pr_efi_err("Exit boot services failed\n");
    + goto fail_free_mmap;
    + }
    +
    + /*
    + * Now we need to return the FDT address to the calling
    + * function so it can be used as part of normal boot.
    + */
    + return new_fdt_addr;
    +
    +fail_free_mmap:
    + efi_call_phys1(sys_table->boottime->free_pool, memory_map);
    +
    +fail_free_new_fdt:
    + efi_free(sys_table, new_fdt_size, new_fdt_addr);
    +
    +fail_free_initrd:
    + efi_free(sys_table, initrd_size, initrd_addr);
    +
    +fail_free_image:
    + efi_free(sys_table, image_memsize, *image_addr);
    +
    +fail_free_dtb:
    + if (fdt_addr)
    + efi_free(sys_table, fdt_size, fdt_addr);
    +
    +fail_free_cmdline:
    + efi_free(sys_table, cmdline_size, (u64)cmdline_ptr);
    +
    +fail:
    + return EFI_ERROR;
    +}
    diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
    index 03adf8f..720429e 100644
    --- a/arch/arm64/kernel/head.S
    +++ b/arch/arm64/kernel/head.S
    @@ -107,8 +107,18 @@
    /*
    * DO NOT MODIFY. Image header expected by Linux boot-loaders.
    */
    +#ifdef CONFIG_EFI_STUB
    + /*
    + * Magic "MZ" signature for PE/COFF
    + * Little Endian: add x13, x18, #0x16
    + */
    +efi_head:
    + .long 0x91005a4d
    + b stext
    +#else
    b stext // branch to kernel start, magic
    .long 0 // reserved
    +#endif
    .quad TEXT_OFFSET // Image load offset from start of RAM
    .quad 0 // reserved
    .quad 0 // reserved
    @@ -119,7 +129,109 @@
    .byte 0x52
    .byte 0x4d
    .byte 0x64
    +#ifdef CONFIG_EFI_STUB
    + .long pe_header - efi_head // Offset to the PE header.
    +#else
    .word 0 // reserved
    +#endif
    +
    +#ifdef CONFIG_EFI_STUB
    + .align 3
    +pe_header:
    + .ascii "PE"
    + .short 0
    +coff_header:
    + .short 0xaa64 // AArch64
    + .short 2 // nr_sections
    + .long 0 // TimeDateStamp
    + .long 0 // PointerToSymbolTable
    + .long 1 // NumberOfSymbols
    + .short section_table - optional_header // SizeOfOptionalHeader
    + .short 0x206 // Characteristics.
    + // IMAGE_FILE_DEBUG_STRIPPED |
    + // IMAGE_FILE_EXECUTABLE_IMAGE |
    + // IMAGE_FILE_LINE_NUMS_STRIPPED
    +optional_header:
    + .short 0x20b // PE32+ format
    + .byte 0x02 // MajorLinkerVersion
    + .byte 0x14 // MinorLinkerVersion
    + .long _edata - stext // SizeOfCode
    + .long 0 // SizeOfInitializedData
    + .long 0 // SizeOfUninitializedData
    + .long efi_stub_entry - efi_head // AddressOfEntryPoint
    + .long stext - efi_head // BaseOfCode
    +
    +extra_header_fields:
    + .quad 0 // ImageBase
    + .long 0x20 // SectionAlignment
    + .long 0x8 // FileAlignment
    + .short 0 // MajorOperatingSystemVersion
    + .short 0 // MinorOperatingSystemVersion
    + .short 0 // MajorImageVersion
    + .short 0 // MinorImageVersion
    + .short 0 // MajorSubsystemVersion
    + .short 0 // MinorSubsystemVersion
    + .long 0 // Win32VersionValue
    +
    + .long _edata - efi_head // SizeOfImage
    +
    + // Everything before the kernel image is considered part of the header
    + .long stext - efi_head // SizeOfHeaders
    + .long 0 // CheckSum
    + .short 0xa // Subsystem (EFI application)
    + .short 0 // DllCharacteristics
    + .quad 0 // SizeOfStackReserve
    + .quad 0 // SizeOfStackCommit
    + .quad 0 // SizeOfHeapReserve
    + .quad 0 // SizeOfHeapCommit
    + .long 0 // LoaderFlags
    + .long 0x6 // NumberOfRvaAndSizes
    +
    + .quad 0 // ExportTable
    + .quad 0 // ImportTable
    + .quad 0 // ResourceTable
    + .quad 0 // ExceptionTable
    + .quad 0 // CertificationTable
    + .quad 0 // BaseRelocationTable
    +
    + // Section table
    +section_table:
    +
    + /*
    + * The EFI application loader requires a relocation section
    + * because EFI applications must be relocatable. This is a
    + * dummy section as far as we are concerned.
    + */
    + .ascii ".reloc"
    + .byte 0
    + .byte 0 // end of 0 padding of section name
    + .long 0
    + .long 0
    + .long 0 // SizeOfRawData
    + .long 0 // PointerToRawData
    + .long 0 // PointerToRelocations
    + .long 0 // PointerToLineNumbers
    + .short 0 // NumberOfRelocations
    + .short 0 // NumberOfLineNumbers
    + .long 0x42100040 // Characteristics (section flags)
    +
    +
    + .ascii ".text"
    + .byte 0
    + .byte 0
    + .byte 0 // end of 0 padding of section name
    + .long _edata - stext // VirtualSize
    + .long stext - efi_head // VirtualAddress
    + .long _edata - stext // SizeOfRawData
    + .long stext - efi_head // PointerToRawData
    +
    + .long 0 // PointerToRelocations (0 for executables)
    + .long 0 // PointerToLineNumbers (0 for executables)
    + .short 0 // NumberOfRelocations (0 for executables)
    + .short 0 // NumberOfLineNumbers (0 for executables)
    + .long 0xe0500020 // Characteristics (section flags)
    + .align 5
    +#endif

    ENTRY(stext)
    mov x21, x0 // x21=FDT
    --
    1.8.3.1


    \
     
     \ /
      Last update: 2013-11-29 23:21    [W:4.036 / U:0.712 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site