lkml.org 
[lkml]   [2013]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation
Date
Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Documentation/devicetree/bindings/mtd/st-fsm.txt | 26 ++++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/st-fsm.txt

diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
new file mode 100644
index 0000000..c248939
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -0,0 +1,26 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+ - compatible : Should be "st,spi-fsm"
+ - reg : Contains register's location and length.
+ - reg-names : Should contain the reg names "spi-fsm"
+ - interrupts : The interrupt number
+ - pinctrl-0 : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+ - st,syscfg : Phandle to boot-device system configuration registers
+ - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+ - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+ spifsm: spifsm@fe902000{
+ compatible = "st,spi-fsm";
+ reg = <0xfe902000 0x1000>;
+ reg-names = "spi-fsm";
+ pinctrl-0 = <&pinctrl_fsm>;
+ st,syscfg = <&syscfg_rear>;
+ st,boot-device-reg = <0x958>;
+ st,boot-device-spi = <0x1a>;
+ status = "okay";
+ };
+
--
1.8.3.2


\
 
 \ /
  Last update: 2013-11-29 14:21    [W:1.509 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site