lkml.org 
[lkml]   [2013]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Q: use vlan in container
On 2013/11/29 13:05, Serge Hallyn wrote:
> Quoting Libo Chen (clbchenlibo.chen@huawei.com):
>> Hello LXC experts,
>>
>> I meet a problem. When using vlan as network device in suse11 system container,
>> I can not use halt to stop this container. It hung on "eth0 is still used from interfaces eth0" in cycle.
>>
>> The config file:
>>
>> lxc.network.type = vlan
>> lxc.network.flags = up
>> lxc.network.link = eth0
>> lxc.network.name = eth0
>> lxc.network.vlan.id = 1301
>> lxc.network.ipv4 = 128.5.131.100/24
>>
>>
>> The reason is in the shell command /sbin/ifdown, see below:
>>
>> ######################################################################
>> # Shut down depending interfaces
>> #
>> # Check if there are interfaces which depend on this interface. If yes these
>> # have to be shut down first.
>> # For example these might be bonding or vlan interfaces. Note that we don't
>> # catch all types of depending interfaces currently. See function
>> # 'get_depending_ifaces' in file 'functions' for details.
>> #
>> test "$SCRIPTNAME" = ifdown && DEP_IFACES=`get_depending_ifaces $INTERFACE`
>> if [ "$?" = 0 -a "$NODEPS" != yes ] ; then
>> message "`printf " %-9s is still used from interfaces %s" \
>> $INTERFACE "$DEP_IFACES"`"
>> for DI in $DEP_IFACES; do
>
> Should the proper fix be to fix this script so that it doesn't call
> ifdown recursively if $DI = $INTERFACE ?

Hi Serge,

yes, I had try this way before as below:

for DI in $DEP_IFACES; do
if [ "$DI" != "$INTERFACE" ] ; then
ifdown $DI -o $OPTIONS
fi
done

It works well, but I have no idea it is safe enough and no side effects?

Thanks,
Libo

>
>> ifdown $DI -o $OPTIONS
>> done
>>
>> message "`printf " %-9s now going down itself" $INTERFACE`"
>> # check if iface is (still) avaliable
>> # [bonding master may go down itself
>> # while the last slave gets removed]
>> if ! is_iface_available $INTERFACE; then
>> exit $R_SUCCESS
>> fi
>> fi
>>
>>
>> $DEP_IFACES is also eth0 in this scene, so ifdown will call ifdown again and again.
>>
>> if we set lxc.network.name = eth1, it will be ok, so can we add a judgment to make
>> lxc.network.link and lxc.network.name are not equal in lxc-start command.
>>
>> simple implement like:
>>
>> if [ lxc.network.type == vlan ] ; then
>> if [ lxc.network.link == lxc.network.name ] ; then
>> return false
>> fi
>> fi
>>
>>
>> Is it reasonable? or any other way to achieve this?
>>
>>
>>
>
> .
>




\
 
 \ /
  Last update: 2013-11-29 08:01    [W:0.068 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site