lkml.org 
[lkml]   [2013]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 06/16] clk: at91: add PMC pll clocks
Date
This patch adds new at91 pll clock implementation using common clk framework.

The pll clock layout describe the PLLX register layout.
There are four pll clock layouts:
- at91rm9200
- at91sam9g20
- at91sam9g45
- sama5d3

PLL clocks are given characteristics:
- min/max clock source rate
- ranges of valid clock output rates
- values to set in out and icpll fields for each supported output range

These characteristics are checked during rate change to avoid
over/underclocking.

These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/clk/at91/Makefile | 2 +-
drivers/clk/at91/clk-pll.c | 537 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/at91/clk-plldiv.c | 135 +++++++++++
drivers/clk/at91/pmc.c | 21 ++
drivers/clk/at91/pmc.h | 11 +
include/linux/clk/at91_pmc.h | 2 +
6 files changed, 707 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/at91/clk-pll.c
create mode 100644 drivers/clk/at91/clk-plldiv.c

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 44105bd..902bbf1 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -3,4 +3,4 @@
#

obj-y += pmc.o
-obj-y += clk-main.o
+obj-y += clk-main.o clk-pll.o clk-plldiv.o
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
new file mode 100644
index 0000000..5e23ee4
--- /dev/null
+++ b/drivers/clk/at91/clk-pll.c
@@ -0,0 +1,537 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include "pmc.h"
+
+#define PLL_STATUS_MASK(id) (1 << (1 + (id)))
+#define PLL_REG(id) (AT91_CKGR_PLLAR + ((id) * 4))
+#define PLL_DIV_MASK 0xff
+#define PLL_DIV_MAX PLL_DIV_MASK
+#define PLL_DIV(reg) ((reg) & PLL_DIV_MASK)
+#define PLL_MUL(reg, layout) (((reg) >> (layout)->mul_shift) & \
+ (layout)->mul_mask)
+#define PLL_ICPR_SHIFT(id) ((id) * 16)
+#define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id))
+#define PLL_MAX_COUNT 0x3ff
+#define PLL_COUNT_SHIFT 8
+#define PLL_OUT_SHIFT 14
+#define PLL_MAX_ID 1
+
+struct clk_pll_characteristics {
+ struct clk_range input;
+ int num_output;
+ struct clk_range *output;
+ u16 *icpll;
+ u8 *out;
+};
+
+struct clk_pll_layout {
+ u32 pllr_mask;
+ u16 mul_mask;
+ u8 mul_shift;
+};
+
+#define to_clk_pll(hw) container_of(hw, struct clk_pll, hw)
+
+struct clk_pll {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ u8 id;
+ u8 div;
+ u8 range;
+ u16 mul;
+ const struct clk_pll_layout *layout;
+ const struct clk_pll_characteristics *characteristics;
+};
+
+static irqreturn_t clk_pll_irq_handler(int irq, void *dev_id)
+{
+ struct clk_pll *pll = (struct clk_pll *)dev_id;
+
+ wake_up(&pll->wait);
+ disable_irq_nosync(pll->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_pll_prepare(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+ const struct clk_pll_layout *layout = pll->layout;
+ u8 id = pll->id;
+ u32 mask = PLL_STATUS_MASK(id);
+ int offset = PLL_REG(id);
+ u8 out = 0;
+ u32 pllr, icpr;
+ u8 div;
+ u16 mul;
+
+ pllr = pmc_read(pmc, offset);
+ div = PLL_DIV(pllr);
+ mul = PLL_MUL(pllr, layout);
+
+ if ((pmc_read(pmc, AT91_PMC_SR) & mask) &&
+ (div == pll->div && mul == pll->mul))
+ return 0;
+
+ if (characteristics->out)
+ out = characteristics->out[pll->range];
+ if (characteristics->icpll) {
+ icpr = pmc_read(pmc, AT91_PMC_PLLICPR) & ~PLL_ICPR_MASK(id);
+ icpr |= (characteristics->icpll[pll->range] <<
+ PLL_ICPR_SHIFT(id));
+ pmc_write(pmc, AT91_PMC_PLLICPR, icpr);
+ }
+
+ pllr &= ~layout->pllr_mask;
+ pllr |= layout->pllr_mask &
+ (pll->div | (PLL_MAX_COUNT << PLL_COUNT_SHIFT) |
+ (out << PLL_OUT_SHIFT) |
+ ((pll->mul & layout->mul_mask) << layout->mul_shift));
+ pmc_write(pmc, offset, pllr);
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & mask)) {
+ enable_irq(pll->irq);
+ wait_event(pll->wait,
+ pmc_read(pmc, AT91_PMC_SR) & mask);
+ }
+
+ return 0;
+}
+
+static int clk_pll_is_prepared(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_SR) &
+ PLL_STATUS_MASK(pll->id));
+}
+
+static void clk_pll_unprepare(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+ const struct clk_pll_layout *layout = pll->layout;
+ int offset = PLL_REG(pll->id);
+ u32 tmp = pmc_read(pmc, offset) & ~(layout->pllr_mask);
+
+ pmc_write(pmc, offset, tmp);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ const struct clk_pll_layout *layout = pll->layout;
+ struct at91_pmc *pmc = pll->pmc;
+ int offset = PLL_REG(pll->id);
+ u32 tmp = pmc_read(pmc, offset) & layout->pllr_mask;
+ u8 div = PLL_DIV(tmp);
+ u16 mul = PLL_MUL(tmp, layout);
+ if (!div || !mul)
+ return 0;
+
+ return (parent_rate * (mul + 1)) / div;
+}
+
+static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
+ unsigned long parent_rate,
+ u32 *div, u32 *mul,
+ u32 *index) {
+ unsigned long maxrate;
+ unsigned long minrate;
+ unsigned long divrate;
+ unsigned long bestdiv = 1;
+ unsigned long bestmul;
+ unsigned long tmpdiv;
+ unsigned long roundup;
+ unsigned long rounddown;
+ unsigned long remainder;
+ unsigned long bestremainder;
+ unsigned long maxmul;
+ unsigned long maxdiv;
+ unsigned long mindiv;
+ int i = 0;
+ const struct clk_pll_layout *layout = pll->layout;
+ const struct clk_pll_characteristics *characteristics =
+ pll->characteristics;
+
+ /* Minimum divider = 1 */
+ /* Maximum multiplier = max_mul */
+ maxmul = layout->mul_mask + 1;
+ maxrate = (parent_rate * maxmul) / 1;
+
+ /* Maximum divider = max_div */
+ /* Minimum multiplier = 2 */
+ maxdiv = PLL_DIV_MAX;
+ minrate = (parent_rate * 2) / maxdiv;
+
+ if (parent_rate < characteristics->input.min ||
+ parent_rate < characteristics->input.max)
+ return -ERANGE;
+
+ if (parent_rate < minrate || parent_rate > maxrate)
+ return -ERANGE;
+
+ for (i = 0; i < characteristics->num_output; i++) {
+ if (parent_rate >= characteristics->output[i].min &&
+ parent_rate <= characteristics->output[i].max)
+ break;
+ }
+
+ if (i >= characteristics->num_output)
+ return -ERANGE;
+
+ bestmul = rate / parent_rate;
+ rounddown = parent_rate % rate;
+ roundup = rate - rounddown;
+ bestremainder = roundup < rounddown ? roundup : rounddown;
+
+ if (!bestremainder) {
+ if (div)
+ *div = bestdiv;
+ if (mul)
+ *mul = bestmul;
+ if (index)
+ *index = i;
+ return rate;
+ }
+
+ maxdiv = 255 / (bestmul + 1);
+ if (parent_rate / maxdiv < characteristics->input.min)
+ maxdiv = parent_rate / characteristics->input.min;
+ mindiv = parent_rate / characteristics->input.max;
+ if (parent_rate % characteristics->input.max)
+ mindiv++;
+
+ for (tmpdiv = mindiv; tmpdiv < maxdiv; tmpdiv++) {
+ divrate = parent_rate / tmpdiv;
+
+ rounddown = rate % divrate;
+ roundup = divrate - rounddown;
+ remainder = roundup < rounddown ? roundup : rounddown;
+
+ if (remainder < bestremainder) {
+ bestremainder = remainder;
+ bestmul = rate / divrate;
+ bestdiv = tmpdiv;
+ }
+
+ if (!remainder)
+ break;
+ }
+
+ rate = (parent_rate / bestdiv) * bestmul;
+
+ if (div)
+ *div = bestdiv;
+ if (mul)
+ *mul = bestmul;
+ if (index)
+ *index = i;
+
+ return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ return clk_pll_get_best_div_mul(pll, rate, *parent_rate,
+ NULL, NULL, NULL);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+ const struct clk_pll_layout *layout = pll->layout;
+ const struct clk_pll_characteristics *characteristics =
+ pll->characteristics;
+ u8 id = pll->id;
+ int offset = PLL_REG(id);
+ long ret;
+ u32 div;
+ u32 mul;
+ u32 index;
+ u32 tmp;
+ u8 out = 0;
+
+ ret = clk_pll_get_best_div_mul(pll, rate, parent_rate,
+ &div, &mul, &index);
+ if (ret < 0)
+ return ret;
+
+ pll->range = index;
+ pll->div = div;
+ pll->mul = mul;
+
+ return 0;
+}
+
+static const struct clk_ops pll_ops = {
+ .prepare = clk_pll_prepare,
+ .unprepare = clk_pll_unprepare,
+ .is_prepared = clk_pll_is_prepared,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+static struct clk * __init
+at91_clk_register_pll(struct at91_pmc *pmc, unsigned int irq, const char *name,
+ const char *parent_name, u8 id,
+ const struct clk_pll_layout *layout,
+ const struct clk_pll_characteristics *characteristics)
+{
+ struct clk_pll *pll;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+ int ret;
+ int offset = PLL_REG(id);
+ u32 tmp;
+
+ if (id > PLL_MAX_ID)
+ return ERR_PTR(-EINVAL);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_GATE;
+
+ pll->id = id;
+ pll->hw.init = &init;
+ pll->layout = layout;
+ pll->characteristics = characteristics;
+ pll->pmc = pmc;
+ pll->irq = irq;
+ tmp = pmc_read(pmc, offset) & layout->pllr_mask;
+ pll->div = PLL_DIV(tmp);
+ pll->mul = PLL_MUL(tmp, layout);
+ init_waitqueue_head(&pll->wait);
+ irq_set_status_flags(pll->irq, IRQ_NOAUTOEN);
+ ret = request_irq(pll->irq, clk_pll_irq_handler, IRQF_TRIGGER_HIGH,
+ id ? "clk-pllb" : "clk-plla", pll);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+
+static const struct clk_pll_layout at91rm9200_pll_layout = {
+ .pllr_mask = 0x7FFFFFF,
+ .mul_shift = 16,
+ .mul_mask = 0x7FF,
+};
+
+static const struct clk_pll_layout at91sam9g45_pll_layout = {
+ .pllr_mask = 0xFFFFFF,
+ .mul_shift = 16,
+ .mul_mask = 0xFF,
+};
+
+static const struct clk_pll_layout at91sam9g20_pllb_layout = {
+ .pllr_mask = 0x3FFFFF,
+ .mul_shift = 16,
+ .mul_mask = 0x3F,
+};
+
+static const struct clk_pll_layout sama5d3_pll_layout = {
+ .pllr_mask = 0x1FFFFFF,
+ .mul_shift = 18,
+ .mul_mask = 0x7F,
+};
+
+
+static struct clk_pll_characteristics * __init
+of_at91_clk_pll_get_characteristics(struct device_node *np)
+{
+ int i;
+ int offset;
+ u32 tmp;
+ int num_output;
+ u32 num_cells;
+ struct clk_range input;
+ struct clk_range *output;
+ u8 *out = NULL;
+ u16 *icpll = NULL;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
+ return NULL;
+
+ if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
+ &num_cells))
+ return NULL;
+
+ if (num_cells < 2 || num_cells > 4)
+ return NULL;
+
+ if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
+ return NULL;
+ num_output = tmp / (sizeof(u32) * num_cells);
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ output = kzalloc(sizeof(*output) * num_output, GFP_KERNEL);
+ if (!output)
+ goto out_free_characteristics;
+
+ if (num_cells > 2) {
+ out = kzalloc(sizeof(*out) * num_output, GFP_KERNEL);
+ if (!out)
+ goto out_free_output;
+ }
+
+ if (num_cells > 3) {
+ icpll = kzalloc(sizeof(*icpll) * num_output, GFP_KERNEL);
+ if (!icpll)
+ goto out_free_output;
+ }
+
+ for (i = 0; i < num_output; i++) {
+ offset = i * num_cells;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset, &tmp))
+ goto out_free_output;
+ output[i].min = tmp;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 1, &tmp))
+ goto out_free_output;
+ output[i].max = tmp;
+
+ if (num_cells == 2)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 2, &tmp))
+ goto out_free_output;
+ out[i] = tmp;
+
+ if (num_cells == 3)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 3, &tmp))
+ goto out_free_output;
+ icpll[i] = tmp;
+ }
+
+ characteristics->input = input;
+ characteristics->num_output = num_output;
+ characteristics->output = output;
+ characteristics->out = out;
+ characteristics->icpll = icpll;
+ return characteristics;
+
+out_free_output:
+ kfree(icpll);
+ kfree(out);
+ kfree(output);
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_pll_setup(struct device_node *np, struct at91_pmc *pmc,
+ const struct clk_pll_layout *layout)
+{
+ u32 id;
+ unsigned int irq;
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_property_read_u32(np, "reg", &id))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ characteristics = of_at91_clk_pll_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_pll(pmc, irq, name, parent_name, id, layout,
+ characteristics);
+ if (IS_ERR(clk))
+ goto out_free_characteristics;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &at91rm9200_pll_layout);
+}
+
+void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &at91sam9g45_pll_layout);
+}
+
+void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &at91sam9g20_pllb_layout);
+}
+
+void __init of_sama5d3_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &sama5d3_pll_layout);
+}
diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c
new file mode 100644
index 0000000..ea22656
--- /dev/null
+++ b/drivers/clk/at91/clk-plldiv.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define to_clk_plldiv(hw) container_of(hw, struct clk_plldiv, hw)
+
+struct clk_plldiv {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+static unsigned long clk_plldiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_plldiv *plldiv = to_clk_plldiv(hw);
+ struct at91_pmc *pmc = plldiv->pmc;
+
+ if (pmc_read(pmc, AT91_PMC_MCKR) & AT91_PMC_PLLADIV2)
+ return parent_rate / 2;
+
+ return parent_rate;
+}
+
+static long clk_plldiv_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long div;
+
+ if (rate > *parent_rate)
+ return *parent_rate;
+ div = *parent_rate / 2;
+ if (rate < div)
+ return div;
+
+ if (rate - div < *parent_rate - rate)
+ return div;
+
+ return *parent_rate;
+}
+
+static int clk_plldiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_plldiv *plldiv = to_clk_plldiv(hw);
+ struct at91_pmc *pmc = plldiv->pmc;
+ u32 tmp;
+
+ if (parent_rate != rate && (parent_rate / 2) != rate)
+ return -EINVAL;
+
+ pmc_lock(pmc);
+ tmp = pmc_read(pmc, AT91_PMC_MCKR) & ~AT91_PMC_PLLADIV2;
+ if ((parent_rate / 2) == rate)
+ tmp |= AT91_PMC_PLLADIV2;
+ pmc_write(pmc, AT91_PMC_MCKR, tmp);
+ pmc_unlock(pmc);
+
+ return 0;
+}
+
+static const struct clk_ops plldiv_ops = {
+ .recalc_rate = clk_plldiv_recalc_rate,
+ .round_rate = clk_plldiv_round_rate,
+ .set_rate = clk_plldiv_set_rate,
+};
+
+static struct clk * __init
+at91_clk_register_plldiv(struct at91_pmc *pmc, const char *name,
+ const char *parent_name)
+{
+ struct clk_plldiv *plldiv;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ plldiv = kzalloc(sizeof(*plldiv), GFP_KERNEL);
+ if (!plldiv)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &plldiv_ops;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.flags = CLK_SET_RATE_GATE;
+
+ plldiv->hw.init = &init;
+ plldiv->pmc = pmc;
+
+ clk = clk_register(NULL, &plldiv->hw);
+
+ if (IS_ERR(clk))
+ kfree(plldiv);
+
+ return clk;
+}
+
+static void __init
+of_at91_clk_plldiv_setup(struct device_node *np, struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_plldiv(pmc, name, parent_name);
+
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+}
+
+void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_plldiv_setup(np, pmc);
+}
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 3d35b73..5af3f2f 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -234,6 +234,27 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
.compatible = "atmel,at91rm9200-clk-main",
.data = of_at91rm9200_clk_main_setup,
},
+ /* PLL clocks */
+ {
+ .compatible = "atmel,at91rm9200-clk-pll",
+ .data = of_at91rm9200_clk_pll_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9g45-clk-pll",
+ .data = of_at91sam9g45_clk_pll_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9g20-clk-pllb",
+ .data = of_at91sam9g20_clk_pllb_setup,
+ },
+ {
+ .compatible = "atmel,sama5d3-clk-pll",
+ .data = of_sama5d3_clk_pll_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-plldiv",
+ .data = of_at91sam9x5_clk_plldiv_setup,
+ },
{ /*sentinel*/ }
};

diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 729aa46..15aaf38 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -61,4 +61,15 @@ int of_at91_get_clk_range(struct device_node *np, const char *propname,
extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
struct at91_pmc *pmc);

+extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_sama5d3_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
#endif /* __PMC_H_ */
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 00c45b3..a6911eb 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -164,6 +164,8 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */
#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */

+#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */
+
#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */
#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-28 14:01    [W:0.103 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site