lkml.org 
[lkml]   [2013]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/5][v2] phylib: Add generic 10G driver
Hello Shaohui,

2013/11/26 <shh.xie@gmail.com>:
> From: Andy Fleming <afleming@freescale.com>
>
> Very incomplete, but will allow for binding an ethernet controller
> to it.
>
> Signed-off-by: Andy Fleming <afleming@freescale.com>
> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
> ---
> v2: turn genphy_driver to an array, add generic 10g driver to it.
>
> drivers/net/phy/phy_device.c | 96 ++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 89 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index d6447b3..96a5e03 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -32,6 +32,7 @@
> #include <linux/module.h>
> #include <linux/mii.h>
> #include <linux/ethtool.h>
> +#include <linux/mdio.h>
> #include <linux/phy.h>
>
> #include <asm/io.h>
> @@ -53,7 +54,7 @@ static void phy_device_release(struct device *dev)
> kfree(to_phy_device(dev));
> }
>
> -static struct phy_driver genphy_driver;
> +static struct phy_driver genphy_driver[2];

Not sure if there are any advantage in using in array here versus two
separate genphy_driver instances, say:

struct phy_driver genphy_driver;
struct phy_driver gen10gphy_driver;

for instance.

If we go for the array, I'd like to use some constant for the array
indices. Right now we only support a generic 10/100/1000 PHY and now a
10G phy, but one day we might support a generic 40G or 100G PHY so the
array indices won't be as obvious as they are today.

> extern int mdio_bus_init(void);
> extern void mdio_bus_exit(void);
>
> @@ -539,7 +540,7 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
> return -ENODEV;
> }
>
> - d->driver = &genphy_driver.driver;
> + d->driver = &genphy_driver[0].driver;

This is where using a constant for an index would become useful.

>
> err = d->driver->probe(d);
> if (err >= 0)
> @@ -620,7 +621,7 @@ void phy_detach(struct phy_device *phydev)
> * was using the generic driver), we unbind the device
> * from the generic driver so that there's a chance a
> * real driver could be loaded */
> - if (phydev->dev.driver == &genphy_driver.driver)
> + if (phydev->dev.driver == &genphy_driver[0].driver)
> device_release_driver(&phydev->dev);
> }
> EXPORT_SYMBOL(phy_detach);
> @@ -689,6 +690,12 @@ static int genphy_config_advert(struct phy_device *phydev)
> return changed;
> }
>
> +int gen10g_config_advert(struct phy_device *dev)
> +{
> + return 0;
> +}
> +EXPORT_SYMBOL(gen10g_config_advert);
> +
> /**
> * genphy_setup_forced - configures/forces speed/duplex from @phydev
> * @phydev: target phy_device struct
> @@ -742,6 +749,11 @@ int genphy_restart_aneg(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(genphy_restart_aneg);
>
> +int gen10g_restart_aneg(struct phy_device *phydev)
> +{
> + return 0;
> +}
> +EXPORT_SYMBOL(gen10g_restart_aneg);
>
> /**
> * genphy_config_aneg - restart auto-negotiation or write BMCR
> @@ -784,6 +796,12 @@ int genphy_config_aneg(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(genphy_config_aneg);
>
> +int gen10g_config_aneg(struct phy_device *phydev)
> +{
> + return 0;
> +}
> +EXPORT_SYMBOL(gen10g_config_aneg);
> +
> /**
> * genphy_update_link - update link status in @phydev
> * @phydev: target phy_device struct
> @@ -913,6 +931,34 @@ int genphy_read_status(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(genphy_read_status);
>
> +int gen10g_read_status(struct phy_device *phydev)
> +{
> + int devad, reg;
> + u32 mmd_mask = phydev->c45_ids.devices_in_package;
> +
> + phydev->link = 1;
> +
> + /* For now just lie and say it's 10G all the time */
> + phydev->speed = SPEED_10000;
> + phydev->duplex = DUPLEX_FULL;
> +
> + for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
> + if (!(mmd_mask & 1))
> + continue;
> +
> + /* Read twice because link state is latched and a
> + * read moves the current state into the register
> + */
> + phy_read_mmd(phydev, devad, MDIO_STAT1);
> + reg = phy_read_mmd(phydev, devad, MDIO_STAT1);
> + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
> + phydev->link = 0;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(gen10g_read_status);
> +
> static int genphy_config_init(struct phy_device *phydev)
> {
> int val;
> @@ -959,6 +1005,16 @@ static int genphy_config_init(struct phy_device *phydev)
>
> return 0;
> }
> +
> +static int gen10g_config_init(struct phy_device *phydev)
> +{
> + /* Temporarily just say we support everything */
> + phydev->supported = SUPPORTED_10000baseT_Full;
> + phydev->advertising = SUPPORTED_10000baseT_Full;
> +
> + return 0;
> +}
> +
> int genphy_suspend(struct phy_device *phydev)
> {
> int value;
> @@ -974,6 +1030,12 @@ int genphy_suspend(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(genphy_suspend);
>
> +int gen10g_suspend(struct phy_device *phydev)
> +{
> + return 0;
> +}
> +EXPORT_SYMBOL(gen10g_suspend);
> +
> int genphy_resume(struct phy_device *phydev)
> {
> int value;
> @@ -989,6 +1051,12 @@ int genphy_resume(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(genphy_resume);
>
> +int gen10g_resume(struct phy_device *phydev)
> +{
> + return 0;
> +}
> +EXPORT_SYMBOL(gen10g_resume);
> +
> /**
> * phy_probe - probe and init a PHY device
> * @dev: device to probe and init
> @@ -1116,7 +1184,8 @@ void phy_drivers_unregister(struct phy_driver *drv, int n)
> }
> EXPORT_SYMBOL(phy_drivers_unregister);
>
> -static struct phy_driver genphy_driver = {
> +static struct phy_driver genphy_driver[] = {
> +{
> .phy_id = 0xffffffff,
> .phy_id_mask = 0xffffffff,
> .name = "Generic PHY",
> @@ -1127,7 +1196,18 @@ static struct phy_driver genphy_driver = {
> .suspend = genphy_suspend,
> .resume = genphy_resume,
> .driver = {.owner= THIS_MODULE, },
> -};
> +}, {
> + .phy_id = 0xffffffff,
> + .phy_id_mask = 0xffffffff,
> + .name = "Generic 10G PHY",
> + .config_init = gen10g_config_init,
> + .features = 0,
> + .config_aneg = gen10g_config_aneg,
> + .read_status = gen10g_read_status,
> + .suspend = gen10g_suspend,
> + .resume = gen10g_resume,
> + .driver = {.owner = THIS_MODULE, },
> +} };
>
> static int __init phy_init(void)
> {
> @@ -1137,7 +1217,8 @@ static int __init phy_init(void)
> if (rc)
> return rc;
>
> - rc = phy_driver_register(&genphy_driver);
> + rc = phy_drivers_register(genphy_driver,
> + ARRAY_SIZE(genphy_driver));
> if (rc)
> mdio_bus_exit();
>
> @@ -1146,7 +1227,8 @@ static int __init phy_init(void)
>
> static void __exit phy_exit(void)
> {
> - phy_driver_unregister(&genphy_driver);
> + phy_drivers_unregister(genphy_driver,
> + ARRAY_SIZE(genphy_driver));
> mdio_bus_exit();
> }
>
> --
> 1.8.4.1
>
>



--
Florian


\
 
 \ /
  Last update: 2013-11-27 20:01    [W:0.093 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site