lkml.org 
[lkml]   [2013]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] clk: add accuracy support for fixed clock
Boris,

Thanks for posting this series. Bear with me as I'm attempting to give
MikeT a hand. Don't be afraid to tell me a question is stupid :-)

On Wed, Nov 27, 2013 at 01:44:45PM +0100, Boris BREZILLON wrote:
> This patch adds support for accuracy retrieval on fixed clocks.
> It also adds a new dt property called 'clock-accuracy' to define the clock
> accuracy.
>
> This can be usefull for oscillator (RC, crystal, ...) definitions which are
> always given an accuracy characteristic.

I think we need to be more explicit in the binding and the API,
especially when providing a method to recalculate the accuracy. I
presume this recalculated value would be relative against the root
clock?

There really needs to be two attributes here: the rated accuracy from
the manufacturer, and the calculated accuracy wrt another clock in the
system. We only need a binding for the manufacturer rating since the
calculated accuracy is determined at runtime.

I would also prefer to see an unknown accuracy be -1. There are already
clocks on the market (PPS reference clocks) with accuracies of
0.1ppb/day [1]. Obviously, these aren't system clocks. So the limit on
accuracy may be a non-issue. However, it may be worth changing the
binding property to express the units.

> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
> ---
> .../devicetree/bindings/clock/fixed-clock.txt | 3 ++
> drivers/clk/clk-fixed-rate.c | 43 +++++++++++++++++---
> include/linux/clk-provider.h | 4 ++
> 3 files changed, 44 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
> index 0b1fe78..48ea0ad 100644
> --- a/Documentation/devicetree/bindings/clock/fixed-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt
> @@ -10,6 +10,8 @@ Required properties:
> - clock-frequency : frequency of clock in Hz. Should be a single cell.
>
> Optional properties:
> +- clock-accuracy : accuracy of clock in ppb (parts per billion).
> + Should be a single cell.

I would prefer to call this property 'clock-rated-ppb'.

> - gpios : From common gpio binding; gpio connection to clock enable pin.
> - clock-output-names : From common clock binding.
>
> @@ -18,4 +20,5 @@ Example:
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <1000000000>;
> + clock-accuracy = <100>;
> };

thx,

Jason.

[1] http://www.vectron.com/products/modules/md-010.htm


\
 
 \ /
  Last update: 2013-11-27 16:41    [W:0.254 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site