lkml.org 
[lkml]   [2013]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: omap: raw read and write endian fix
Date
From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
Posting this as a saparate patch out of RFC series.
RFC: http://patchwork.ozlabs.org/patch/291726/
Only minor comment change is done since RFC patch.

Based on v3.13-rc1

drivers/i2c/busses/i2c-omap.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d76228d..90dcc2e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base +
+ writew_relaxed(val, i2c_dev->base +
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}

static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base +
+ return readw_relaxed(i2c_dev->base +
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}

@@ -1162,9 +1162,9 @@ omap_i2c_probe(struct platform_device *pdev)
* Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
* On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
* Also since the omap_i2c_read_reg uses reg_map_ip_* a
- * raw_readw is done.
+ * readw_relaxed is done.
*/
- rev = __raw_readw(dev->base + 0x04);
+ rev = readw_relaxed(dev->base + 0x04);

dev->scheme = OMAP_I2C_SCHEME(rev);
switch (dev->scheme) {
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-27 15:21    [W:0.049 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site