Messages in this thread Patch in this message |  | | From | Ivan Khoronzhuk <> | Subject | [PATCH v4 5/5] watchdog: davinci: reuse driver for keystone arch | Date | Wed, 27 Nov 2013 14:48:28 +0200 |
| |
The keystone arch uses the same IP watchdog, so add "ti,keystone-wdt" compatible and correct identity.
The Keystone arch is using clocks in DT and source clock for watchdog has to be specified, so add this to binding.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> --- .../devicetree/bindings/watchdog/davinci-wdt.txt | 12 ++++++++++-- drivers/watchdog/Kconfig | 4 ++-- drivers/watchdog/davinci_wdt.c | 2 +- 3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt index e450134..e60b9a1 100644 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt @@ -1,11 +1,18 @@ -DaVinci Watchdog Timer (WDT) Controller +Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller Required properties: -- compatible : Should be "ti,davinci-wdt" +- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt" - reg : Should contain WDT registers location and length Optional properties: - timeout-sec : Contains the watchdog timeout in seconds +- clocks : the clock feeding the watchdog timer. + Needed if platform uses clocks. + See clock-bindings.txt + +Documentation: +Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf +Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf Examples: @@ -13,4 +20,5 @@ wdt: wdt@2320000 { compatible = "ti,davinci-wdt"; reg = <0x02320000 0x80>; timeout-sec = <30>; + clocks = <&clkwdtimer0>; }; diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index eb8c89d..01f3f81 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -270,12 +270,12 @@ config IOP_WATCHDOG config DAVINCI_WATCHDOG tristate "DaVinci watchdog" - depends on ARCH_DAVINCI + depends on ARCH_DAVINCI || ARCH_KEYSTONE select WATCHDOG_CORE select WATCHDOG_NOWAYOUT help Say Y here if to include support for the watchdog timer - in the DaVinci DM644x/DM646x processors. + in the DaVinci DM644x/DM646x or Keystone processors. To compile this driver as a module, choose M here: the module will be called davinci_wdt. diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 0eb2189..884f696 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -143,7 +143,7 @@ static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd) static const struct watchdog_info davinci_wdt_info = { .options = WDIOF_KEEPALIVEPING, - .identity = "DaVinci Watchdog", + .identity = "DaVinci/Keystone Watchdog", }; static const struct watchdog_ops davinci_wdt_ops = { -- 1.7.9.5
|  |