lkml.org 
[lkml]   [2013]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] firmware/dmi_scan: generalize for use by other archs
Date
On Mon, 25 Nov 2013 13:07:23 +0100, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> Hello all,
>
> Resending this patch to a slightly wider audience.
>
> The point of this patch is reworking the dmi_scan code slightly so it
> can be reused on ARM and arm64.
> There are no functional changes for x86 or IA-64, just one open
> question, i.e., whether the non-EFI fallback probe should be performed
> on IA-64 in the first place.
>
> If I could get acks for this patch please (if there are no
> objections), I will propose it to be merged through the ARM and/or
> arm64 trees as part of the complete series to enable SMBIOS.
>
> On 21 November 2013 12:40, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> > This patch makes a couple of changes to the SMBIOS/DMI scanning
> > code so it can be used on other archs (such as ARM and arm64):
> > (a) wrap the calls to ioremap()/iounmap(), this allows the use of a
> > flavor of ioremap() more suitable for random unaligned access;
> > (b) allow the non-EFI fallback probe into hardcoded physical address
> > 0xF0000 to be disabled.
> >
> > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Looks good.

Reviewed-by: Grant Likely <grant.likely@linaro.org>

> > ---
> >
> > @Tony: does the fallback probe make any sense at all on IA-64? It was enabled
> > before, so I added the #define for IA-64 as well, but perhaps we could remove it
> > altogether?
> >
> > arch/ia64/include/asm/dmi.h | 10 +++++++---
> > arch/x86/include/asm/dmi.h | 8 ++++++--
> > drivers/firmware/dmi_scan.c | 20 +++++++++++---------
> > 3 files changed, 24 insertions(+), 14 deletions(-)
> >
> > diff --git a/arch/ia64/include/asm/dmi.h b/arch/ia64/include/asm/dmi.h
> > index 185d3d1..61e3b56 100644
> > --- a/arch/ia64/include/asm/dmi.h
> > +++ b/arch/ia64/include/asm/dmi.h
> > @@ -5,8 +5,12 @@
> > #include <asm/io.h>
> >
> > /* Use normal IO mappings for DMI */
> > -#define dmi_ioremap ioremap
> > -#define dmi_iounmap(x,l) iounmap(x)
> > -#define dmi_alloc(l) kzalloc(l, GFP_ATOMIC)
> > +#define dmi_early_remap ioremap
> > +#define dmi_early_unmap(x,l) iounmap(x)
> > +#define dmi_remap ioremap
> > +#define dmi_unmap iounmap
> > +#define dmi_alloc(l) kzalloc(l, GFP_ATOMIC)
> > +
> > +#define DMI_SCAN_MACHINE_NON_EFI_FALLBACK 1
> >
> > #endif
> > diff --git a/arch/x86/include/asm/dmi.h b/arch/x86/include/asm/dmi.h
> > index fd8f9e2..bb2b572 100644
> > --- a/arch/x86/include/asm/dmi.h
> > +++ b/arch/x86/include/asm/dmi.h
> > @@ -13,7 +13,11 @@ static __always_inline __init void *dmi_alloc(unsigned len)
> > }
> >
> > /* Use early IO mappings for DMI because it's initialized early */
> > -#define dmi_ioremap early_ioremap
> > -#define dmi_iounmap early_iounmap
> > +#define dmi_early_remap early_ioremap
> > +#define dmi_early_unmap early_iounmap
> > +#define dmi_remap ioremap
> > +#define dmi_unmap iounmap
> > +
> > +#define DMI_SCAN_MACHINE_NON_EFI_FALLBACK 1
> >
> > #endif /* _ASM_X86_DMI_H */
> > diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
> > index fa0affb..2c7c793 100644
> > --- a/drivers/firmware/dmi_scan.c
> > +++ b/drivers/firmware/dmi_scan.c
> > @@ -108,7 +108,7 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
> > {
> > u8 *buf;
> >
> > - buf = dmi_ioremap(dmi_base, dmi_len);
> > + buf = dmi_early_remap(dmi_base, dmi_len);
> > if (buf == NULL)
> > return -1;
> >
> > @@ -116,7 +116,7 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
> >
> > add_device_randomness(buf, dmi_len);
> >
> > - dmi_iounmap(buf, dmi_len);
> > + dmi_early_unmap(buf, dmi_len);
> > return 0;
> > }
> >
> > @@ -483,18 +483,19 @@ void __init dmi_scan_machine(void)
> > * needed during early boot. This also means we can
> > * iounmap the space when we're done with it.
> > */
> > - p = dmi_ioremap(efi.smbios, 32);
> > + p = dmi_early_remap(efi.smbios, 32);
> > if (p == NULL)
> > goto error;
> > memcpy_fromio(buf, p, 32);
> > - dmi_iounmap(p, 32);
> > + dmi_early_unmap(p, 32);
> >
> > if (!dmi_present(buf)) {
> > dmi_available = 1;
> > goto out;
> > }
> > } else {
> > - p = dmi_ioremap(0xF0000, 0x10000);
> > +#ifdef DMI_SCAN_MACHINE_NON_EFI_FALLBACK
> > + p = dmi_early_remap(0xF0000, 0x10000);
> > if (p == NULL)
> > goto error;
> >
> > @@ -510,12 +511,13 @@ void __init dmi_scan_machine(void)
> > memcpy_fromio(buf + 16, q, 16);
> > if (!dmi_present(buf)) {
> > dmi_available = 1;
> > - dmi_iounmap(p, 0x10000);
> > + dmi_early_unmap(p, 0x10000);
> > goto out;
> > }
> > memcpy(buf, buf + 16, 16);
> > }
> > - dmi_iounmap(p, 0x10000);
> > + dmi_early_unmap(p, 0x10000);
> > +#endif
> > }
> > error:
> > pr_info("DMI not present or invalid.\n");
> > @@ -787,13 +789,13 @@ int dmi_walk(void (*decode)(const struct dmi_header *, void *),
> > if (!dmi_available)
> > return -1;
> >
> > - buf = ioremap(dmi_base, dmi_len);
> > + buf = dmi_remap(dmi_base, dmi_len);
> > if (buf == NULL)
> > return -1;
> >
> > dmi_table(buf, dmi_len, dmi_num, decode, private_data);
> >
> > - iounmap(buf);
> > + dmi_unmap(buf);
> > return 0;
> > }
> > EXPORT_SYMBOL_GPL(dmi_walk);
> > --
> > 1.8.3.2
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



\
 
 \ /
  Last update: 2013-11-27 13:41    [W:0.065 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site