lkml.org 
[lkml]   [2013]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/9] arm: zynq: Add support for cpufreq
Date
I revised this series and rebased on top of Linus' tree. Patch specific
changes are tracked in the respective email with their patch. On the
level of the whole series, this changed:

v2:
- added 'clocksource/cadence_ttc: Use enable/disable_irq'. I hope that
is more appropriate to avoid races of the timer with its interrupt
handler.
- added 'arm: zynq: Don't use arm_global_timer with cpufreq'. In the
3.13 merge window we enabled the arm_global_timer for Zynq. That
timer is clocked by the CPU clock and hence does not provide a stable
clocksource when cpufreq is enabled. That patch makes the selection of
the GT driver depend on !CPU_FREQ for Zynq.

Sören

Soren Brinkmann (9):
arm: dt: zynq: Remove 'clock-ranges' from TTC nodes
arm: dt: zynq: Add 'cpus' node
clocksource/cadence_ttc: Store timer frequency in driver data
clocksource/cadence_ttc: Use enable/disable_irq
clocksource/cadence_ttc: Adjust interval in clock notifier
clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
clocksource/cadence_ttc: Use only one counter
arm: zynq: Don't use arm_global_timer with cpufreq
arm: zynq: Add support for cpufreq

arch/arm/boot/dts/zynq-7000.dtsi | 27 +++-
arch/arm/mach-zynq/Kconfig | 4 +-
arch/arm/mach-zynq/common.c | 3 +
drivers/clocksource/cadence_ttc_timer.c | 235 +++++++++++++++++++-------------
4 files changed, 174 insertions(+), 95 deletions(-)

--
1.8.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-11-27 07:41    [W:0.057 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site