lkml.org 
[lkml]   [2013]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/12] memory: davinci-aemif: introduce AEMIF driver
On Tuesday 26 November 2013 12:21 PM, Sekhar Nori wrote:
> On 11/26/2013 8:35 PM, Santosh Shilimkar wrote:
>> On Tuesday 26 November 2013 02:20 AM, Sekhar Nori wrote:
>>> On Monday 11 November 2013 10:36 PM, Khoronzhuk, Ivan wrote:
>>>> Add new AEMIF driver for EMIF16 davinci controller. The EMIF16 module
>>>> is intended to provide a glue-less interface to a variety of
>>>> asynchronous memory devices like ASRA M, NOR and NAND memory. A total
>>>> of 256M bytes of any of these memories can be accessed at any given
>>>> time via four chip selects with 64M byte access per chip select.
>>>>
>>>> Synchronous memories such as DDR1 SD RAM, SDR SDRAM and Mobile SDR
>>>> are not supported.
>>>>
>>>> See http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
>>>>
>>>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
>>>> ---
>>
>> [...]
>>
>>>> +static int davinci_aemif_probe(struct platform_device *pdev)
>>>> +{
>>>> + int ret = -ENODEV, i;
>>>> + struct resource *res;
>>>> + struct device *dev = &pdev->dev;
>>>> + struct device_node *np = dev->of_node;
>>>> +
>>>> + if (np == NULL)
>>>> + return 0;
>>>> +
>>>> + if (aemif) {
>>>> + dev_err(dev, "davinci_aemif driver is in use currently\n");
>>>> + return -EBUSY;
>>>> + }
>>>
>>> Why expressly prevent multiple AEMIF devices? Its entirely conceivable
>>> to have two memories like NAND and NOR flash connect to two different
>>> AEMIF interfaces.
>>>
>> Ivan wanted me to clarify the Keystone hardware which supports
>> 1 instance of controller with 4 CS. That allows already four
>> devices to be connected. Currently NAND and NOR are connected on it
>> and two more slots are free.
>>
>> Since driver support what hardware is, lets not build a driver for
>> hardware which don't exist. And if at all such a support would be
>> needed in future, we can always add it.
>
> I understand the lack of hardware part, but its common to write the
> driver such that it can handle multiple instances. Is there any gain on
> current hardware because of this check? From what I am hearing, the code
> in question wont be exercised at all. So why go all the way and add it
> in first place?
>
Fair enough. The check can be dropped.

Regards,
Santosh


\
 
 \ /
  Last update: 2013-11-26 20:21    [W:0.815 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site