lkml.org 
[lkml]   [2013]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/9] staging: dwc2: update DT binding to add generic clock/phy properties
On Monday 25 November 2013 11:46 PM, Matt Porter wrote:
> dwc2/s3c-hsotg require a single clock to be specified and optionally
> a generic phy. On the s3c-hsotg driver old style USB phy support is
> present as a fallback so the generic phy properties are optional.
>
> Signed-off-by: Matt Porter <matt.porter@linaro.org>
> ---
> Documentation/devicetree/bindings/staging/dwc2.txt | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt
> index 1a1b7cf..b8b42b6 100644
> --- a/Documentation/devicetree/bindings/staging/dwc2.txt
> +++ b/Documentation/devicetree/bindings/staging/dwc2.txt
> @@ -5,6 +5,12 @@ Required properties:
> - compatible : "snps,dwc2"
> - reg : Should contain 1 register range (address and length)
> - interrupts : Should contain 1 interrupt
> +- clocks: clock provider specifier
> +- clock-names: shall be "otg"
> +- phys: phy provider specifier
> +- phy-names: shall be "device"

lets mention in the Documentation too that the phy properties are optional.
apart from that..
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> +Refer to clk/clock-bindings.txt for generic clock consumer properties
> +Refer to phy/phy-bindings.txt for generic phy consumer properties
>
> Example:
>
> @@ -12,4 +18,8 @@ Example:
> compatible = "ralink,rt3050-usb, snps,dwc2";
> reg = <0x101c0000 40000>;
> interrupts = <18>;
> + clocks = <&usb_otg_ahb_clk>;
> + clock-names = "otg";
> + phys = <&usbphy>;
> + phy-names = "device";
> };
>



\
 
 \ /
  Last update: 2013-11-26 11:41    [W:0.370 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site