lkml.org 
[lkml]   [2013]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCHv9 02/20] thermal: introduce device tree parser
On Tue, Nov 12, 2013 at 07:46:04PM +0000, Eduardo Valentin wrote:
> This patch introduces a device tree bindings for
> describing the hardware thermal behavior and limits.
> Also a parser to read and interpret the data and feed
> it in the thermal framework is presented.
>
> This patch introduces a thermal data parser for device
> tree. The parsed data is used to build thermal zones
> and thermal binding parameters. The output data
> can then be used to deploy thermal policies.
>
> This patch adds also documentation regarding this
> API and how to define tree nodes to use
> this infrastructure.
>
> Note that, in order to be able to have control
> on the sensor registration on the DT thermal zone,
> it was required to allow changing the thermal zone
> .get_temp callback. For this reason, this patch
> also removes the 'const' modifier from the .ops
> field of thermal zone devices.
>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
>
> Hello all,
>
> Very minor changes from v8 to v9.
>
> Changelog:
>
> - Rephrase a couple of sentences in the binding document
> - Fixed a couple of property types in the binding document
> - Removed the constant macro definitions for trip type. This
> change also affected the bindings posted on patches 09/14/15.
>
> .../devicetree/bindings/thermal/thermal.txt | 586 ++++++++++++++
> drivers/thermal/Kconfig | 13 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/of-thermal.c | 849 +++++++++++++++++++++
> drivers/thermal/thermal_core.c | 9 +-
> drivers/thermal/thermal_core.h | 9 +
> include/dt-bindings/thermal/thermal.h | 17 +
> include/linux/thermal.h | 28 +-
> 8 files changed, 1509 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/thermal.txt
> create mode 100644 drivers/thermal/of-thermal.c
> create mode 100644 include/dt-bindings/thermal/thermal.h
>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
> new file mode 100644
> index 0000000..59f5bd2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/thermal.txt
> @@ -0,0 +1,586 @@
> +* Thermal Framework Device Tree descriptor
> +
> +This file describes a generic binding to provide a way of
> +defining hardware thermal structure using device tree.
> +A thermal structure includes thermal zones and their components,
> +such as trip points, polling intervals, sensors and cooling devices
> +binding descriptors.
> +
> +The target of device tree thermal descriptors is to describe only
> +the hardware thermal aspects. The thermal device tree bindings are
> +not about how the system must control or which algorithm or policy
> +must be taken in place.
> +
> +There are five types of nodes involved to describe thermal bindings:
> +- thermal sensors: devices which may be used to take temperature
> + measurements.
> +- cooling devices: devices which may be used to dissipate heat.
> +- trip points: describe key temperatures at which cooling is recommended. The
> + set of points should be chosen based on hardware limits.
> +- cooling maps: used to describe links between trip points and cooling devices;
> +- thermal zones: used to describe thermal data within the hardware;
> +
> +The following is a description of each of these node types.
> +
> +* Thermal sensor devices
> +
> +Thermal sensor devices are nodes providing temperature sensing capabilities on
> +thermal zones. Typical devices are I2C ADC converters and bandgaps. These are
> +nodes providing temperature data to thermal zones. Thermal sensor devices may
> +control one or more internal sensors.
> +
> +Required property:
> +- #thermal-sensor-cells: Used to provide sensor device specific information
> + Type: unsigned while referring to it. Typically 0 on thermal sensor
> + Size: one cell nodes with only one sensor, and at least 1 on nodes
> + with several internal sensors, in order
> + to identify uniquely the sensor instances within
> + the IC. See thermal zone binding for more details
> + on how consumers refer to sensor devices.
> +
> +* Cooling device nodes
> +
> +Cooling devices are nodes providing control on power dissipation. There
> +are essentially two ways to provide control on power dissipation. First
> +is by means of regulating device performance, which is known as passive
> +cooling. A typical passive cooling is a CPU that has dynamic voltage and
> +frequency scaling (DVFS), and uses lower frequencies as cooling states.
> +Second is by means of activating devices in order to remove
> +the dissipated heat, which is known as active cooling, e.g. regulating
> +fan speeds. In both cases, cooling devices shall have a way to determine
> +the state of cooling in which the device is.
> +
> +Required properties:
> +- cooling-min-state: An integer indicating the smallest
> + Type: unsigned cooling state accepted. Typically 0.
> + Size: one cell
> +
> +- cooling-max-state: An integer indicating the largest
> + Type: unsigned cooling state accepted.
> + Size: one cell
> +
> +- #cooling-cells: Used to provide cooling device specific information
> + Type: unsigned while referring to it. Must be at least 2, in order
> + Size: one cell to specify minimum and maximum cooling state used
> + in the reference. The first cell is the minimum
> + cooling state requested and the second cell is
> + the maximum cooling state requested in the reference.
> + See Cooling device maps section below for more details
> + on how consumers refer to cooling devices.
This is the point I'm still most concerned with, as it provides a
definite meaning to an otherwise abstract property. However, if you
believe this is sane and unlikely to be problematic, then I am happy to
leave the decision to you.

> +
> +* Trip points
> +
> +The trip node is a node to describe a point in the temperature domain
> +in which the system takes an action. This node describes just the point,
> +not the action.
> +
> +Required properties:
> +- temperature: An integer indicating the trip temperature level,
> + Type: signed in millicelsius.
> + Size: one cell
> +
> +- hysteresis: A low hysteresis value on temperature property (above).
> + Type: unsigned This is a relative value, in millicelsius.
> + Size: one cell
> +
> +- type: a string containing the trip type. Supported values are:

Get rid of the "Supported", that's a Linux detail.

s/Supported/expected/ ?

Given the discussion has otherwise boiled down to bits that I think can
change later, I'm happy to give my ack:

Acked-by: Mark Rutland <mark.rutland@arm.com>

I'll leave it to the others to fight against this if they still have
concerns.

Thanks,
Mark.


\
 
 \ /
  Last update: 2013-11-25 17:21    [W:0.459 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site