lkml.org 
[lkml]   [2013]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 5/6] watchdog: davinci: reuse driver for keystone arch
On 11/25/2013 04:08 PM, Ivan Khoronzhuk wrote:
> The keystone arch uses the same IP watchdog, so add "ti,keystone-wdt"
> compatible and correct identity.
>
> The Keystone arch is using clocks in DT and source clock for watchdog
> has to be specified, so add this to binding.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> .../devicetree/bindings/watchdog/davinci-wdt.txt | 12 ++++++++++--
> drivers/watchdog/Kconfig | 4 ++--
> drivers/watchdog/davinci_wdt.c | 2 +-
> 3 files changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> index e450134..4d89317 100644
> --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
> @@ -1,11 +1,18 @@
> -DaVinci Watchdog Timer (WDT) Controller
> +Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
>
> Required properties:
> -- compatible : Should be "ti,davinci-wdt"
> +- compatible : Should be "ti,davinci-wdt" or "ti,keystone-wdt"
> - reg : Should contain WDT registers location and length
>
> Optional properties:
> - timeout-sec : Contains the watchdog timeout in seconds
> +- clocks : the clock feeding the watchdog timer.
> + Needed if platform uses clocks.
> + See clock-bindings.txt
> +
> +Documentation:
> +Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
> +Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
>
> Examples:
>
> @@ -13,4 +20,5 @@ wdt: wdt@2320000 {
> compatible = "ti,davinci-wdt";
> reg = <0x02320000 0x80>;
> timeout-sec = <30>;
> + clocks = <&clkwdtimer0>;
> };
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index eb8c89d..01f3f81 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -270,12 +270,12 @@ config IOP_WATCHDOG
>
> config DAVINCI_WATCHDOG
> tristate "DaVinci watchdog"
> - depends on ARCH_DAVINCI
> + depends on ARCH_DAVINCI || ARCH_KEYSTONE
> select WATCHDOG_CORE
> select WATCHDOG_NOWAYOUT
> help
> Say Y here if to include support for the watchdog timer
> - in the DaVinci DM644x/DM646x processors.
> + in the DaVinci DM644x/DM646x or Keystone processors.
> To compile this driver as a module, choose M here: the
> module will be called davinci_wdt.
>
> diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
> index d342fc2..9128c74 100644
> --- a/drivers/watchdog/davinci_wdt.c
> +++ b/drivers/watchdog/davinci_wdt.c
> @@ -143,7 +143,7 @@ static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd)
>
> static const struct watchdog_info davinci_wdt_info = {
> .options = WDIOF_KEEPALIVEPING,
> - .identity = "DaVinci Watchdog",
> + .identity = "DaVinci/Keystone Watchdog",
> };
>
> static const struct watchdog_ops davinci_wdt_ops = {
>

Sorry for mess, ignore this patch.
Now it is in reply to Update Davinci watchdog driver

--
Regards,
Ivan Khoronzhuk


\
 
 \ /
  Last update: 2013-11-25 16:21    [W:0.035 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site