lkml.org 
[lkml]   [2013]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/3] bq2415x_charger: Use power_supply notifier for automode
From
Hi

On Tue, Nov 19, 2013 at 11:18 AM, Pali Rohár <pali.rohar@gmail.com> wrote:
> This patch removing set_mode_hook function from board data and replacing it with
> new string variable of notifier power supply device. After this change it is
> possible to add DT support because driver does not need specific board function
> anymore. Only static data and name of power supply device is required.
>
> Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> ---
> drivers/power/bq2415x_charger.c | 77 +++++++++++++++++++++++++--------
> include/linux/power/bq2415x_charger.h | 48 +++-----------------
> 2 files changed, 65 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
> index 0727f92..d89583d 100644
> --- a/drivers/power/bq2415x_charger.c
> +++ b/drivers/power/bq2415x_charger.c
> @@ -1,7 +1,7 @@
> /*
> * bq2415x charger driver
> *
> - * Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com>
> + * Copyright (C) 2011-2013 Pali Rohár <pali.rohar@gmail.com>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> @@ -170,6 +170,7 @@ struct bq2415x_device {
> struct bq2415x_platform_data init_data;
> struct power_supply charger;
> struct delayed_work work;
> + struct notifier_block nb;
> enum bq2415x_mode reported_mode;/* mode reported by hook function */
> enum bq2415x_mode mode; /* current configured mode */
> enum bq2415x_chip chip;
> @@ -791,24 +792,53 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
>
> }
>
> -/* hook function called by other driver which set reported mode */
> -static void bq2415x_hook_function(enum bq2415x_mode mode, void *data)
> +static int bq2415x_notifier_call(struct notifier_block *nb,
> + unsigned long val, void *v)
> {
> - struct bq2415x_device *bq = data;
> + struct bq2415x_device *bq =
> + container_of(nb, struct bq2415x_device, nb);
> + struct power_supply *psy = v;
> + enum bq2415x_mode mode;
> + union power_supply_propval prop;
> + int ret;
> + int mA;
>
> - if (!bq)
> - return;
> + if (val != PSY_EVENT_PROP_CHANGED)
> + return NOTIFY_OK;
> +
> + if (strcmp(psy->name, bq->init_data.notify_device) != 0)
> + return NOTIFY_OK;
> +
> + dev_dbg(bq->dev, "notifier call was called\n");
> +
> + ret = psy->get_property(psy, POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
> + if (ret != 0)
> + return NOTIFY_OK;

So you can read this value without any type of synchronization with
the power_supply_core
and sysfs implementation?


Michael

> +
> + mA = prop.intval;
> +
> + if (mA == 0)
> + mode = BQ2415X_MODE_OFF;
> + else if (mA < 500)
> + mode = BQ2415X_MODE_NONE;
> + else if (mA < 1800)
> + mode = BQ2415X_MODE_HOST_CHARGER;
> + else
> + mode = BQ2415X_MODE_DEDICATED_CHARGER;
> +
> + if (bq->reported_mode == mode)
> + return NOTIFY_OK;
>
> - dev_dbg(bq->dev, "hook function was called\n");
> bq->reported_mode = mode;
>
> /* if automode is not enabled do not tell about reported_mode */
> if (bq->automode < 1)
> - return;
> + return NOTIFY_OK;
>
> sysfs_notify(&bq->charger.dev->kobj, NULL, "reported_mode");
> bq2415x_set_mode(bq, bq->reported_mode);
>
> + return NOTIFY_OK;
> }
>
> /**** timer functions ****/
> @@ -1508,6 +1538,7 @@ static int bq2415x_probe(struct i2c_client *client,
> int num;
> char *name;
> struct bq2415x_device *bq;
> + struct power_supply *psy;
>
> if (!client->dev.platform_data) {
> dev_err(&client->dev, "platform data not set\n");
> @@ -1569,16 +1600,27 @@ static int bq2415x_probe(struct i2c_client *client,
> goto error_4;
> }
>
> - if (bq->init_data.set_mode_hook) {
> - if (bq->init_data.set_mode_hook(
> - bq2415x_hook_function, bq)) {
> - bq->automode = 1;
> + if (bq->init_data.notify_device) {
> + bq->nb.notifier_call = bq2415x_notifier_call;
> + ret = power_supply_reg_notifier(&bq->nb);
> + if (ret) {
> + dev_err(bq->dev, "failed to reg notifier: %d\n", ret);
> + goto error_5;
> + }
> + psy = power_supply_get_by_name(bq->init_data.notify_device);
> + if (psy) {
> + /* Query for initial reported_mode and set it */
> + bq2415x_notifier_call(&bq->nb,
> + PSY_EVENT_PROP_CHANGED, psy);
> bq2415x_set_mode(bq, bq->reported_mode);
> - dev_info(bq->dev, "automode enabled\n");
> } else {
> - bq->automode = -1;
> - dev_info(bq->dev, "automode failed\n");
> + dev_info(bq->dev, "notifier power supply device (%s) "
> + "for automode is not registred yet... "
> + "automode will not work without that device\n",
> + bq->init_data.notify_device);
> }
> + bq->automode = 1;
> + dev_info(bq->dev, "automode enabled\n");
> } else {
> bq->automode = -1;
> dev_info(bq->dev, "automode not supported\n");
> @@ -1590,6 +1632,7 @@ static int bq2415x_probe(struct i2c_client *client,
> dev_info(bq->dev, "driver registered\n");
> return 0;
>
> +error_5:
> error_4:
> bq2415x_sysfs_exit(bq);
> error_3:
> @@ -1610,8 +1653,8 @@ static int bq2415x_remove(struct i2c_client *client)
> {
> struct bq2415x_device *bq = i2c_get_clientdata(client);
>
> - if (bq->init_data.set_mode_hook)
> - bq->init_data.set_mode_hook(NULL, NULL);
> + if (bq->init_data.notify_device)
> + power_supply_unreg_notifier(&bq->nb);
>
> bq2415x_sysfs_exit(bq);
> bq2415x_power_supply_exit(bq);
> diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h
> index 8dcc0f4..50762af 100644
> --- a/include/linux/power/bq2415x_charger.h
> +++ b/include/linux/power/bq2415x_charger.h
> @@ -1,7 +1,7 @@
> /*
> * bq2415x charger driver
> *
> - * Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com>
> + * Copyright (C) 2011-2013 Pali Rohár <pali.rohar@gmail.com>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> @@ -31,46 +31,9 @@
> * termination current. It it is less or equal to zero, configuring charge
> * and termination current will not be possible.
> *
> - * Function set_mode_hook is needed for automode (setting correct current
> - * limit when charger is connected/disconnected or setting boost mode).
> - * When is NULL, automode function is disabled. When is not NULL, it must
> - * have this prototype:
> - *
> - * int (*set_mode_hook)(
> - * void (*hook)(enum bq2415x_mode mode, void *data),
> - * void *data)
> - *
> - * hook is hook function (see below) and data is pointer to driver private
> - * data
> - *
> - * bq2415x driver will call it as:
> - *
> - * platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device);
> - *
> - * Board/platform function set_mode_hook return non zero value when hook
> - * function was successful registered. Platform code should call that hook
> - * function (which get from pointer, with data) every time when charger
> - * was connected/disconnected or require to enable boost mode. bq2415x
> - * driver then will set correct current limit, enable/disable charger or
> - * boost mode.
> - *
> - * Hook function has this prototype:
> - *
> - * void hook(enum bq2415x_mode mode, void *data);
> - *
> - * mode is bq2415x mode (charger or boost)
> - * data is pointer to driver private data (which get from
> - * set_charger_type_hook)
> - *
> - * When bq driver is being unloaded, it call function:
> - *
> - * platform_data->set_mode_hook(NULL, NULL);
> - *
> - * (hook function and driver private data are NULL)
> - *
> - * After that board/platform code must not call driver hook function! It
> - * is possible that pointer to hook function will not be valid and calling
> - * will cause undefined result.
> + * For automode support is needed to provide name of power supply device
> + * in value notify_device. Device driver must immediately report property
> + * POWER_SUPPLY_PROP_CURRENT_MAX when current changed.
> */
>
> /* Supported modes with maximal current limit */
> @@ -89,8 +52,7 @@ struct bq2415x_platform_data {
> int charge_current; /* mA */
> int termination_current; /* mA */
> int resistor_sense; /* m ohm */
> - int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data),
> - void *data);
> + const char *notify_device; /* name */
> };
>
> #endif
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-11-24 18:41    [W:0.214 / U:1.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site