lkml.org 
[lkml]   [2013]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] cpufreq: suspend/resume governors with PM notifiers
On Friday 22 November 2013 03:44 AM, Rafael J. Wysocki wrote:
> Short-term. To be precise, governors may be stopped at the beginning of
> dpm_suspend_noirq() (that is, where cpuidle_pause() is called). Analogously,
> they may be started again in dpm_resume_noirq(), where cpuidle_resume() is
> called. That at least would be consistent with what cpuidle already does.

Ahh, I mentioned the location to be after "freeze" as I thought CPUs are removed
before calling dpm_suspend_noirq(). And yes I was *wrong*..

So, dpm_suspend_noirq() and resume_noirq() looks to be the right place to get
that stuff in.. And that will fit cleanly in the existing code as well.. Not
many changes would be required in the $subject patch..

> That said in my opinion the appropriate long-term approach would be to split
> CPU offline and online each into two parts, the "core" part and the "extras"
> part, such that the "core" parts would only do the offline/online of the
> cores themselves. The rest, such as cpufreq/cpuidle "offline/online" would
> be done in the "extras" part.
>
> Then, system suspend/resume will only use the "core" parts of CPU offline/online
> and the handling of the things belonging to "extras" would be carried out
> through CPU device suspend/resume callbacks. In turn, the "runtime" CPU offline
> and online would carry out both the "extras" and "core" parts as it does today.
>
> Makes sense?

Yes it does. Very much.

So, I will probably float a initial patch with the dpm_{suspend|resume}_noirq()
approach to get things fixed for now. And then will do what you suggested. And
yes logically this makes sense, a lot of sense. cpuidle/freq are about managing
CPUs and so we better have a CPU driver here, to take care of suspend/resume paths.

I have few questions regarding the long term solution. There can be only one
driver for any device, this is how device-driver model is. But there can be many
users of cpu driver. Like ACPI (which we already have:
drivers/acpi/processor_driver.c), CPUFreq, CPUIdle and maybe more..

To get all these serviced together we probably need to write another layer on
top of these to which these will register their callbacks.

Then I started looking into kernel code to understand different frameworks we
are using and came across: subsys_interface. This is the comment over it:

* Simple interfaces attached to a subsystem. Multiple interfaces can
* attach to a subsystem and its devices. Unlike drivers, they do not
* exclusively claim or control devices. Interfaces usually represent
* a specific functionality of a subsystem/class of devices.

And it exactly fits our purpose. We don't really need a CPU driver as there are
multiple frameworks that need it for the same device. And probably we just need
a interface which would call user specific callbacks (user being: cpufreq,
cpuidle, maybe more)..

So, what about something like this ?

diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index f48370d..523c0bc 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -120,6 +120,45 @@ static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store);
#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
#endif /* CONFIG_HOTPLUG_CPU */

+int cpu_subsys_suspend_noirq(struct device *dev)
+{
+ struct bus_type *bus = dev->bus;
+ struct subsys_interface *sif;
+ int ret = 0;
+
+ list_for_each_entry(sif, &bus->p->interfaces, node) {
+ if (sif->pm && sif->pm->suspend_noirq) {
+ ret = sif->suspend_noirq(dev);
+ if (ret)
+ break;
+ }
+ }
+
+ return ret;
+}
+
+int cpu_subsys_resume_noirq(struct device *dev)
+{
+ struct bus_type *bus = dev->bus;
+ struct subsys_interface *sif;
+ int ret = 0;
+
+ list_for_each_entry(sif, &bus->p->interfaces, node) {
+ if (sif->pm && sif->pm->resume_noirq) {
+ ret = sif->resume_noirq(dev);
+ if (ret)
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static const struct dev_pm_ops cpu_subsys_pm_ops = {
+ .suspend_noirq = cpu_subsys_suspend_noirq,
+ .resume_noirq = cpu_subsys_resume_noirq,
+};
+
struct bus_type cpu_subsys = {
.name = "cpu",
.dev_name = "cpu",
@@ -128,6 +167,7 @@ struct bus_type cpu_subsys = {
.online = cpu_subsys_online,
.offline = cpu_subsys_offline,
#endif
+ .pm = &cpu_subsys_pm_ops,
};
EXPORT_SYMBOL_GPL(cpu_subsys);

diff --git a/include/linux/device.h b/include/linux/device.h
index b025925..fa01273 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -298,11 +298,16 @@ struct device *driver_find_device(struct device_driver *drv,
* @node: the list of functions registered at the subsystem
* @add_dev: device hookup to device function handler
* @remove_dev: device hookup to device function handler
+ * @pm: Power management operations of this interface.
*
* Simple interfaces attached to a subsystem. Multiple interfaces can
* attach to a subsystem and its devices. Unlike drivers, they do not
* exclusively claim or control devices. Interfaces usually represent
* a specific functionality of a subsystem/class of devices.
+ *
+ * PM callbacks are called from individual subsystems instead of PM core. And
+ * hence might not be available for all subsystems. Currently present for:
+ * cpu_subsys.
*/
struct subsys_interface {
const char *name;
@@ -310,6 +315,7 @@ struct subsys_interface {
struct list_head node;
int (*add_dev)(struct device *dev, struct subsys_interface *sif);
int (*remove_dev)(struct device *dev, struct subsys_interface *sif);
+ const struct dev_pm_ops *pm;
};

int subsys_interface_register(struct subsys_interface *sif);


\
 
 \ /
  Last update: 2013-11-22 10:21    [W:0.138 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site