lkml.org 
[lkml]   [2013]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Allow MUSB DSPS to use "force host" mode
On 22/11/13 17:01, Sebastian Andrzej Siewior wrote:
> On 11/22/2013 05:49 PM, Mark Jackson wrote:
>>> and the ID pin not on ground or 3.3V?
>>> What are the side effects? I remember correctly Bin wanted to avoid
>>> settings this if it could be avoided.
>>
>> Yes ... we have a host only USB port and an unconnected ID pin.
>
> Is it too late to connect that pin?

Unfortunately, yes.

The USB portion of the CPU board has not been needed until now, and
although I did know about the unconnected pin, I also knew it could be
fixed in s/w, so I wasn't too concerned.

>> AFAIK it defaults to device mode so I can't see any devices that get
>> plugged into the USB port.
>>
>> If I tweak the s/w to "force" host mode on, then everything appears to
>> work okay.
>>
>> I guess it's more of a hardware oversight that we left the pin floating
>> but in the real world, I guess someone may want this feature to they
>> can change the usb port type ?
>
> This is something I would prefer to avoid if possible. We have the
> dr_mode attribute in DT. Based on that one we act as a device or host.
> Now if you decide (via dr_mode) either for host or device that means we
> have to set that bit. Where I feel a little uncomfortable is when
> someone having OTG runs in hostmode and attaches a host.
>
>>
>> Either way, I need to fix the current h/w (which can be done via s/w)
>> hence the patch.
> I've seen many projects where this pin has been forgotten and it could
> not be changed in SW and they patched the HW. Usually this is noticed
> in the early phase and a wire is just soldered and the redesign has it
> fixed. So I don't think that this is a big issue.
> Do you insists on having this change merged upstream?

No ... I didn't think it would be such an issue, so I'm happy to keep this
as a local patch if that's any better.

Mark J.


\
 
 \ /
  Last update: 2013-11-22 18:41    [W:0.108 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site