lkml.org 
[lkml]   [2013]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 3/7] Staging: comedi: change printk to dev_err/dev_dbg in unioxx5.c
Date
This is a patch which fixes coding style issues due to printk usage in
unioxx5.c found by checkpatch.pl in the following functions:
1) __unioxx5_digital_read
2) __unioxx5_analog_read
3) __unioxx5_digital_config

To subsitute printk with dev_err/dev_dbg, access to the struct device is
required. The function definitions of the above functions have been changed
to take the pointer to the struct comedi_subdevice as a parameter instead
of the pointer to struct unioxx5_subd_priv.

The pointers to the stuct device and the struct unioxx5_subd_priv are
obtained through the pointer to the struct comedi_subdevice in these functions.

The function calls of __unioxx5_digital_read and __unioxx5_analog_read in
unioxx5_subdev_read have been changed to pass the pointer to the struct
comedi_subdevice.

Signed-off-by: Conrad Gomes <conrad.s.j.gomes@gmail.com>
---
drivers/staging/comedi/drivers/unioxx5.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 2b1ece8..31736ed 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -91,12 +91,14 @@ static int __unioxx5_define_chan_offset(int chan_num)
}

#if 0 /* not used? */
-static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode)
+static void __unioxx5_digital_config(struct comedi_subdevice *s, int mode)
{
+ struct unioxx5_subd_priv *usp = s->private;
+ struct device *csdev = s->device->class_dev;
int i, mask;

mask = (mode == ALL_2_OUTPUT) ? 0xFF : 0x00;
- printk("COMEDI: mode = %d\n", mask);
+ dev_dbg(csdev, "mode = %d\n", mask);

outb(1, usp->usp_iobase + 0);

@@ -135,15 +137,18 @@ static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel)
usp->usp_prev_cn_val[channel_offset - 1] = conf;
}

-static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
+static int __unioxx5_digital_read(struct comedi_subdevice *s,
unsigned int *data, int channel, int minor)
{
+ struct unioxx5_subd_priv *usp = s->private;
+ struct device *csdev = s->device->class_dev;
int channel_offset, mask = 1 << (channel & 0x07);

channel_offset = __unioxx5_define_chan_offset(channel);
if (channel_offset < 0) {
- pr_err("comedi%d: undefined channel %d. channel range is 0 .. 23\n",
- minor, channel);
+ dev_err(csdev,
+ "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
+ minor, channel);
return 0;
}

@@ -157,9 +162,11 @@ static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
return 1;
}

-static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
+static int __unioxx5_analog_read(struct comedi_subdevice *s,
unsigned int *data, int channel, int minor)
{
+ struct unioxx5_subd_priv *usp = s->private;
+ struct device *csdev = s->device->class_dev;
int module_no, read_ch;
char control;

@@ -185,7 +192,8 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,

/* if four bytes readding error occurs - return 0(false) */
if ((control & Rx4CA_ERR_MASK)) {
- printk("COMEDI: 4 bytes error\n");
+ dev_err(csdev,
+ "comedi%d: 4 bytes error\n", minor);
return 0;
}

@@ -273,10 +281,10 @@ static int unioxx5_subdev_read(struct comedi_device *dev,
type = usp->usp_module_type[channel / 2];

if (type == MODULE_DIGITAL) {
- if (!__unioxx5_digital_read(usp, data, channel, dev->minor))
+ if (!__unioxx5_digital_read(subdev, data, channel, dev->minor))
return -1;
} else {
- if (!__unioxx5_analog_read(usp, data, channel, dev->minor))
+ if (!__unioxx5_analog_read(subdev, data, channel, dev->minor))
return -1;
}

--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-21 21:41    [W:0.099 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site