lkml.org 
[lkml]   [2013]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 04/10] mtd: nand: davinci: simplify error handling
Date
There is not needed to use a lot of names for err handling.
It complicates code support and reading.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/mtd/nand/davinci_nand.c | 46 +++++++++++++++------------------------
1 file changed, 17 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9a96ac7..c0be223 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -615,8 +615,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "unable to allocate memory\n");
- ret = -ENOMEM;
- goto err_nomem;
+ return -ENOMEM;
}

platform_set_drvdata(pdev, info);
@@ -625,20 +624,16 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res1 || !res2) {
dev_err(&pdev->dev, "resource missing\n");
- ret = -EINVAL;
- goto err_nomem;
+ return -EINVAL;
}

vaddr = devm_ioremap_resource(&pdev->dev, res1);
- if (IS_ERR(vaddr)) {
- ret = PTR_ERR(vaddr);
- goto err_ioremap;
- }
+ if (IS_ERR(vaddr))
+ return PTR_ERR(vaddr);
+
base = devm_ioremap_resource(&pdev->dev, res2);
- if (IS_ERR(base)) {
- ret = PTR_ERR(base);
- goto err_ioremap;
- }
+ if (IS_ERR(base))
+ return PTR_ERR(base);

info->dev = &pdev->dev;
info->base = base;
@@ -705,7 +700,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
spin_unlock_irq(&davinci_nand_lock);

if (ret == -EBUSY)
- goto err_ecc;
+ return ret;

info->chip.ecc.calculate = nand_davinci_calculate_4bit;
info->chip.ecc.correct = nand_davinci_correct_4bit;
@@ -721,8 +716,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->chip.ecc.strength = pdata->ecc_bits;
break;
default:
- ret = -EINVAL;
- goto err_ecc;
+ return -EINVAL;
}
info->chip.ecc.mode = ecc_mode;

@@ -730,7 +724,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
- goto err_clk;
+ return ret;
}

ret = clk_prepare_enable(info->clk);
@@ -759,7 +753,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->core_chipsel);
if (ret < 0) {
dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
- goto err_timing;
+ goto err;
}

spin_lock_irq(&davinci_nand_lock);
@@ -775,7 +769,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
- goto err_scan;
+ goto err;
}

/* Update ECC layout if needed ... for 1-bit HW ECC, the default
@@ -789,7 +783,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
if (!chunks || info->mtd.oobsize < 16) {
dev_dbg(&pdev->dev, "too small\n");
ret = -EINVAL;
- goto err_scan;
+ goto err;
}

/* For small page chips, preserve the manufacturer's
@@ -820,7 +814,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "no 4-bit ECC support yet "
"for 4KiB-page NAND\n");
ret = -EIO;
- goto err_scan;
+ goto err;

syndrome_done:
info->chip.ecc.layout = &info->ecclayout;
@@ -828,7 +822,7 @@ syndrome_done:

ret = nand_scan_tail(&info->mtd);
if (ret < 0)
- goto err_scan;
+ goto err;

if (pdata->parts)
ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
@@ -841,7 +835,7 @@ syndrome_done:
NULL, 0);
}
if (ret < 0)
- goto err_scan;
+ goto err;

val = davinci_nand_readl(info, NRCSR_OFFSET);
dev_info(&pdev->dev, "controller rev. %d.%d\n",
@@ -849,8 +843,7 @@ syndrome_done:

return 0;

-err_scan:
-err_timing:
+err:
clk_disable_unprepare(info->clk);

err_clk_enable:
@@ -858,11 +851,6 @@ err_clk_enable:
if (ecc_mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
-
-err_ecc:
-err_clk:
-err_ioremap:
-err_nomem:
return ret;
}

--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-21 12:41    [W:0.089 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site