Messages in this thread | | | Date | Thu, 21 Nov 2013 13:05:57 +0900 | From | Simon Horman <> | Subject | Re: [PATCH] ARM: shmobile: Add pinctrl_register_mappings() for Koelsch |
| |
On Wed, Nov 20, 2013 at 04:41:48PM +0900, Magnus Damm wrote: > From: Magnus Damm <damm@opensource.se> > > Add code to setup the r8a7791 PFC for the Koelsch board. > > At this point serial consoles are added, and in the near > future other platform-device-only devices will be added > here like for instance the r8a7791 DU. > > Signed-off-by: Magnus Damm <damm@opensource.se> > --- > > arch/arm/mach-shmobile/board-koelsch.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+)
Thanks, I will queue this up. Assuming all goes will I plan to push this and other updates today or tomorrow.
> > --- 0014/arch/arm/mach-shmobile/board-koelsch.c > +++ work/arch/arm/mach-shmobile/board-koelsch.c 2013-11-20 16:18:28.000000000 +0900 > @@ -24,6 +24,7 @@ > #include <linux/input.h> > #include <linux/kernel.h> > #include <linux/leds.h> > +#include <linux/pinctrl/machine.h> > #include <linux/platform_data/gpio-rcar.h> > #include <linux/platform_device.h> > #include <mach/common.h> > @@ -78,9 +79,20 @@ static const struct gpio_keys_platform_d > .nbuttons = ARRAY_SIZE(gpio_buttons), > }; > > +static const struct pinctrl_map koelsch_pinctrl_map[] = { > + /* SCIF0 (CN19: DEBUG SERIAL0) */ > + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", > + "scif0_data_d", "scif0"), > + /* SCIF1 (CN20: DEBUG SERIAL1) */ > + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791", > + "scif1_data_d", "scif1"), > +}; > + > static void __init koelsch_add_standard_devices(void) > { > r8a7791_clock_init(); > + pinctrl_register_mappings(koelsch_pinctrl_map, > + ARRAY_SIZE(koelsch_pinctrl_map)); > r8a7791_pinmux_init(); > r8a7791_add_standard_devices(); > platform_device_register_data(&platform_bus, "leds-gpio", -1, >
| |