lkml.org 
[lkml]   [2013]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: m25p80: Flash protection support for STmicro chips
Hi,

On 01/04/2013 01:02 AM, Austin Boyle wrote:
> This patch adds generic support for flash protection on STmicro chips.
> On chips with less than 3 protection bits, the unused bits are don't cares
> and so can be written anyway.

I have two remarks:

1) I believe this introduces incompatibilities with existing bootloaders
which do not support this feature.
Namely, u-boot is not able (to the best of my knowledge) to treat these
bits properly. So as soon as you write something to your SPI nor flash
from within linux, u-boot is not able to erase/rewrite those blocks anymore.

Wouldn't it make more sense to selectively enable this feature, only if
explicity configured to do so (e.g. through its device tree node)?
Like what was used for the Spansion's PPB, see:

http://lists.infradead.org/pipermail/linux-mtd/2013-January/045536.html

> The lock function will only change the
> protection bits if it would not unlock other areas. Similarly, the unlock
> function will not lock currently unlocked areas. Tested on the m25p64.
>
> From: Austin Boyle <Austin.Boyle@aviatnet.com>
> Signed-off-by: Austin Boyle <Austin.Boyle@aviatnet.com>
> ---
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 4eeeb2d..069e34f 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -565,6 +565,96 @@ time_out:
> return ret;
> }
>
> +static int m25p80_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> +{
> + struct m25p *flash = mtd_to_m25p(mtd);
> + uint32_t offset = ofs;
> + uint8_t status_old, status_new;
> + int res = 0;
> +
> + mutex_lock(&flash->lock);
> + /* Wait until finished previous command */
> + if (wait_till_ready(flash)) {
> + res = 1;
> + goto err;
> + }
> +
> + status_old = read_sr(flash);
> +
> + if (offset < flash->mtd.size-(flash->mtd.size/2))
> + status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0;
> + else if (offset < flash->mtd.size-(flash->mtd.size/4))
> + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
> + else if (offset < flash->mtd.size-(flash->mtd.size/8))
> + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
> + else if (offset < flash->mtd.size-(flash->mtd.size/16))
> + status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2;
> + else if (offset < flash->mtd.size-(flash->mtd.size/32))
> + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
> + else if (offset < flash->mtd.size-(flash->mtd.size/64))
> + status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1;
> + else
> + status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0;

2) While I believe this might work on m25p32, m25p64 and m25p128 (i.e.
flashes with 64 blocks or more), it looks incorrect for smaller chips
(namely our m25p80, with just 16 blocks). There, the 1/64 logic scales
down to 1/16, e.g.
- 000 means protect nothing
- 001 means protect 1/16th (=1 blocks) [m25p64 => 1/64th]
- 010 means protect 1/8th (=2 blocks) [m25p64 => 1/32th]
- ...
- 100 means protect 1/2nd (=8 blocks)
- 101,110, 111 mean protect everything

and I assume the same goes for chips with fewer sectors.

Any comments?

Thanks,
Gerlando

> +
> + /* Only modify protection if it will not unlock other areas */
> + if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) >
> + (status_old&(SR_BP2|SR_BP1|SR_BP0))) {
> + write_enable(flash);
> + if (write_sr(flash, status_new) < 0) {
> + res = 1;
> + goto err;
> + }
> + }
> +
> +err: mutex_unlock(&flash->lock);
> + return res;
> +}
> +
> +static int m25p80_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> +{
> + struct m25p *flash = mtd_to_m25p(mtd);
> + uint32_t offset = ofs;
> + uint8_t status_old, status_new;
> + int res = 0;
> +
> + mutex_lock(&flash->lock);
> + /* Wait until finished previous command */
> + if (wait_till_ready(flash)) {
> + res = 1;
> + goto err;
> + }
> +
> + status_old = read_sr(flash);
> +
> + if (offset+len > flash->mtd.size-(flash->mtd.size/64))
> + status_new = status_old & ~(SR_BP2|SR_BP1|SR_BP0);
> + else if (offset+len > flash->mtd.size-(flash->mtd.size/32))
> + status_new = (status_old & ~(SR_BP2|SR_BP1)) | SR_BP0;
> + else if (offset+len > flash->mtd.size-(flash->mtd.size/16))
> + status_new = (status_old & ~(SR_BP2|SR_BP0)) | SR_BP1;
> + else if (offset+len > flash->mtd.size-(flash->mtd.size/8))
> + status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0;
> + else if (offset+len > flash->mtd.size-(flash->mtd.size/4))
> + status_new = (status_old & ~(SR_BP0|SR_BP1)) | SR_BP2;
> + else if (offset+len > flash->mtd.size-(flash->mtd.size/2))
> + status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0;
> + else
> + status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1;
> +
> + /* Only modify protection if it will not lock other areas */
> + if ((status_new&(SR_BP2|SR_BP1|SR_BP0)) <
> + (status_old&(SR_BP2|SR_BP1|SR_BP0))) {
> + write_enable(flash);
> + if (write_sr(flash, status_new) < 0) {
> + res = 1;
> + goto err;
> + }
> + }
> +
> +err: mutex_unlock(&flash->lock);
> + return res;
> +}
> +
> /****************************************************************************/
>
> /*
> @@ -899,6 +989,12 @@ static int m25p_probe(struct spi_device *spi)
> flash->mtd._erase = m25p80_erase;
> flash->mtd._read = m25p80_read;
>
> + /* flash protection support for STmicro chips */
> + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
> + flash->mtd._lock = m25p80_lock;
> + flash->mtd._unlock = m25p80_unlock;
> + }
> +
> /* sst flash chips use AAI word program */
> if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
> flash->mtd._write = sst_write;
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>




\
 
 \ /
  Last update: 2013-11-20 21:41    [W:1.138 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site