lkml.org 
[lkml]   [2013]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: current_thread_info() not respecting program order with gcc 4.8.x
On Tue, Nov 19, 2013 at 05:13:22PM +0100, Jakub Jelinek wrote:
> On Tue, Nov 19, 2013 at 04:57:49PM +0100, Peter Zijlstra wrote:
> > On Tue, Nov 19, 2013 at 03:29:12PM +0000, Mathieu Desnoyers wrote:
> > > However, looking at ARM arch/arm/include/asm/thread_info.h:
> > >
> > > static inline struct thread_info *current_thread_info(void) { register
> > > unsigned long sp asm ("sp"); return (struct thread_info *)(sp &
> > > ~(THREAD_SIZE - 1)); }
> > >
> > > The inline assembly has no clobber and is not volatile. (this is also
> > > true for all other architectures I've looked at so far, which includes
> > > x86 and powerpc)
>
> The above is not inline assembly, it is a local register variable extension,
> see
> http://gcc.gnu.org/onlinedocs/gcc-4.8.2/gcc/Local-Reg-Vars.html#Local-Reg-Vars
>
> > > Since each current_thread_info() is a different asm ("sp") without
> > > clobber nor volatile, AFAIU, the compiler is within its right to
> > > reorder them.
>
> Sure.
>
> > > One possible solution to this might be to add "memory" clobber and
> > > volatile to this inline asm, but I fear it would put way too much
> > > constraints on the compiler optimizations (too heavyweight).
>
> As it is not inline asm extension, you can't.
> Of course you could add asm volatile ("" : "=r" (ret) : "0" (sp));
> or similar and thus make it a barrier, but I think the current
> definition of current_thread_info meant to avoid all that extra
> overhead. Why does it matter when sp is different between the
> current_thread_info () calls? As long as sp & ~(THREAD_SIZE - 1) is
> the same, it shouldn't make a difference. Or is the call in between those
> changing sp to something else?

So what appears to be happening is that:

preempt_enable()
barrier();
current_thread_info()->preempt_count--;

(1)

might_sleep()
if (current_thread_info()->preempt_count)
/* raise all bloody hell */

Gets re-ordered like:

barrier();
if (current_thread_info()->preempt_count)
/* raise hell */
current_thread_info()->preempt_count--;


And by inserting a barrier() at (1) things revert to normal and work
again.

The "sp" reg value itself doesn't change here.


\
 
 \ /
  Last update: 2013-11-19 17:41    [W:0.748 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site