lkml.org 
[lkml]   [2013]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] mips: Use NULL as the default DTB
Date
early_init_dt_scan() now takes care of falling back to the built-in DTB.

On Netlogic XLP, use initial_boot_params in device_tree_init(), like
the other MIPS sub-platforms do, as xlp_fdt_blob will now be NULL when
using the default built-in DTB.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
---
arch/mips/lantiq/prom.c | 2 +-
arch/mips/mti-sead3/sead3-setup.c | 2 +-
arch/mips/netlogic/xlp/dt.c | 8 +++-----
arch/mips/ralink/of.c | 2 +-
4 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 19686c5bc5ed..582f6e4a5f6d 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -71,7 +71,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(NULL);
}

void __init device_tree_init(void)
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index 928ba84c8a78..3afec4507ea5 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -25,7 +25,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(NULL);
}

void __init device_tree_init(void)
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index 87250f378386..e52281b9214d 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -66,7 +66,6 @@ void __init *xlp_dt_init(void *fdtp)
#endif
default:
/* Pick a built-in if any, and hope for the best */
- fdtp = &__dtb_start;
break;
}
}
@@ -83,13 +82,12 @@ void __init xlp_early_init_devtree(void)
void __init device_tree_init(void)
{
unsigned long base, size;
- struct boot_param_header *fdtp = xlp_fdt_blob;

- if (!fdtp)
+ if (!initial_boot_params)
return;

- base = virt_to_phys(fdtp);
- size = be32_to_cpu(fdtp->totalsize);
+ base = virt_to_phys(initial_boot_params);
+ size = be32_to_cpu(initial_boot_params->totalsize);

/* Before we do anything, lets reserve the dt blob */
reserve_bootmem(base, size, BOOTMEM_DEFAULT);
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 615603bd8063..d72a5bc1efc2 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -84,7 +84,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(NULL);

if (soc_info.mem_size)
add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-19 12:41    [W:0.162 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site