lkml.org 
[lkml]   [2013]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: tegra: properly use FUSE clock
On 11/18/2013 04:43 AM, Thierry Reding wrote:
> On Mon, Nov 18, 2013 at 07:40:47PM +0900, Alexandre Courbot wrote:
>> FUSE clock is enabled by most bootloaders, but we cannot expect
>> it to be on in all contexts (e.g. kexec).
>>
>> This patch adds a FUSE clkdev to all Tegra platforms and makes
>> sure it is enabled before touching FUSE registers.
>> tegra_init_fuse() is invoked during very early boot and thus
>> cannot rely on the clock framework ; therefore the FUSE clock is
>> forcibly enabled using a register write in that function, and
>> remains that way until the clock framework can be used.
>>
>> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> ---
>> arch/arm/mach-tegra/fuse.c | 41
>> +++++++++++++++++++++++++++++++++++++++-
>> drivers/clk/tegra/clk-tegra114.c | 1 +
>> drivers/clk/tegra/clk-tegra124.c | 1 +
>> drivers/clk/tegra/clk-tegra20.c | 1 +
>
> Isn't this missing the clock driver changes for Tegra30? Ah...
> Tegra30 already has this clock defined. I wonder why only Tegra30
> has it. grep says that fuse-tegra isn't used by any drivers, which
> also indicates that perhaps we don't need the .dev_id in the first
> place. We should be able to get by with just the .con_id = "fuse".
>
> Also are there any reasons to keep this in one single patch? Since
> none of the fuse clocks are used yet, I think the clock changes
> could be a separate patch that can go in through the clock tree.
> And there isn't even a hard runtime dependency, since if the Tegra
> changes were to go in without the clock changes, then the fallback
> code in this patch should still turn the clock on properly. It just
> might not be turned off again, but isn't that something we can live
> with for a short period of time? I think perhaps that could even be
> improved, see further below.
>
> I've added Mike on Cc, he'll need to either take the patch in
> through his tree or Ack this one, so he needs to see it
> eventually.
>
>> 4 files changed, 43 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-tegra/fuse.c
>> b/arch/arm/mach-tegra/fuse.c index 9a4e910c3796..3b9191b930b5
>> 100644 --- a/arch/arm/mach-tegra/fuse.c +++
>> b/arch/arm/mach-tegra/fuse.c @@ -22,6 +22,7 @@ #include
>> <linux/io.h> #include <linux/export.h> #include <linux/random.h>
>> +#include <linux/clk.h> #include <linux/tegra-soc.h>
>>
>> #include "fuse.h" @@ -54,6 +55,7 @@ int tegra_cpu_speedo_id; /*
>> only exist in Tegra30 and later */ int tegra_soc_speedo_id; enum
>> tegra_revision tegra_revision;
>>
>> +static struct clk *fuse_clk; static int tegra_fuse_spare_bit;
>> static void (*tegra_init_speedo_data)(void);
>>
>> @@ -77,6 +79,22 @@ static const char
>> *tegra_revision_name[TEGRA_REVISION_MAX] = { [TEGRA_REVISION_A04]
>> = "A04", };
>>
>> +static void tegra_fuse_enable_clk(void) +{ + if
>> (IS_ERR(fuse_clk)) + fuse_clk = clk_get_sys("fuse-tegra",
>> "fuse"); + if (IS_ERR(fuse_clk)) + return;
>
> Perhaps instead of just returning here, this should actually be
> where the code to enable the clock should go.
>
>> + clk_prepare_enable(fuse_clk); +} + +static void
>> tegra_fuse_disable_clk(void) +{ + if (IS_ERR(fuse_clk)) +
>> return;
>
> And this is where we could disable it again. That way we should
> get equal functionality in both cases.

That would need a shared lock with the clock code; at some point, the
clock will be registered, and the clock subsystem in control of the
enable bit. I think having a very early tegra_init_fuse() come along
and force the clock on, and then having the rest of the fuse code use
the clock object as soon as it's available, is the safest approach.

Of course, I suppose there's still a window where the following might
happen:

cpu 0:
- tegra_fuse_enable_clk entered
- fails to clk_get
cpu 1
- tegra clk driver is registered
- clk subsystem initcall disables all
unused clocks
- access a fuse register

-> badness

I'm not sure how to protect against that, unless we simply assume that
all the fuse driver functions are guaranteed to happen early and
before the clk subsystem's initcall, so that can't happen?


\
 
 \ /
  Last update: 2013-11-19 01:21    [W:0.057 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site