lkml.org 
[lkml]   [2013]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] Add Broadcom Kona PWM Support
Date
This series introduces the driver for the Kona PWM controller found in
Broadcom mobile SoCs like bcm281xx and updates the device tree and the
defconfig to enable use of this hardware on the bcm28155 AP board.

It depends on: https://lkml.org/lkml/2013/11/14/521

Tim Kryger (5):
Documentation: dt: Add kona-pwm binding
pwm: kona: Introduce Kona PWM controller support
ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
ARM: dts: Enable the PWM for bcm28155 AP board
ARM: bcm_defconfig: Enable PWM and Backlight

.../devicetree/bindings/pwm/bcm-kona-pwm.txt | 24 +++
arch/arm/boot/dts/bcm11351.dtsi | 8 +
arch/arm/boot/dts/bcm28155-ap.dts | 4 +
arch/arm/configs/bcm_defconfig | 2 +
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-bcm-kona.c | 226 +++++++++++++++++++++
7 files changed, 275 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt
create mode 100644 drivers/pwm/pwm-bcm-kona.c

--
1.8.0.1




\
 
 \ /
  Last update: 2013-11-18 21:21    [W:0.151 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site