lkml.org 
[lkml]   [2013]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.11 18/25] perf: Fix perf ring buffer memory ordering
Date
3.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit bf378d341e4873ed928dc3c636252e6895a21f50 upstream.

The PPC64 people noticed a missing memory barrier and crufty old
comments in the perf ring buffer code. So update all the comments and
add the missing barrier.

When the architecture implements local_t using atomic_long_t there
will be double barriers issued; but short of introducing more
conditional barrier primitives this is the best we can do.

Reported-by: Victor Kaplansky <victork@il.ibm.com>
Tested-by: Victor Kaplansky <victork@il.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: michael@ellerman.id.au
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: anton@samba.org
Cc: benh@kernel.crashing.org
Link: http://lkml.kernel.org/r/20131025173749.GG19466@laptop.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
include/uapi/linux/perf_event.h | 12 +++++++-----
kernel/events/ring_buffer.c | 31 +++++++++++++++++++++++++++----
2 files changed, 34 insertions(+), 9 deletions(-)

--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -428,13 +428,15 @@ struct perf_event_mmap_page {
/*
* Control data for the mmap() data buffer.
*
- * User-space reading the @data_head value should issue an rmb(), on
- * SMP capable platforms, after reading this value -- see
- * perf_event_wakeup().
+ * User-space reading the @data_head value should issue an smp_rmb(),
+ * after reading this value.
*
* When the mapping is PROT_WRITE the @data_tail value should be
- * written by userspace to reflect the last read data. In this case
- * the kernel will not over-write unread data.
+ * written by userspace to reflect the last read data, after issueing
+ * an smp_mb() to separate the data read from the ->data_tail store.
+ * In this case the kernel will not over-write unread data.
+ *
+ * See perf_output_put_handle() for the data ordering.
*/
__u64 data_head; /* head in the data section */
__u64 data_tail; /* user-space written tail */
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -87,10 +87,31 @@ again:
goto out;

/*
- * Publish the known good head. Rely on the full barrier implied
- * by atomic_dec_and_test() order the rb->head read and this
- * write.
+ * Since the mmap() consumer (userspace) can run on a different CPU:
+ *
+ * kernel user
+ *
+ * READ ->data_tail READ ->data_head
+ * smp_mb() (A) smp_rmb() (C)
+ * WRITE $data READ $data
+ * smp_wmb() (B) smp_mb() (D)
+ * STORE ->data_head WRITE ->data_tail
+ *
+ * Where A pairs with D, and B pairs with C.
+ *
+ * I don't think A needs to be a full barrier because we won't in fact
+ * write data until we see the store from userspace. So we simply don't
+ * issue the data WRITE until we observe it. Be conservative for now.
+ *
+ * OTOH, D needs to be a full barrier since it separates the data READ
+ * from the tail WRITE.
+ *
+ * For B a WMB is sufficient since it separates two WRITEs, and for C
+ * an RMB is sufficient since it separates two READs.
+ *
+ * See perf_output_begin().
*/
+ smp_wmb();
rb->user_page->data_head = head;

/*
@@ -154,9 +175,11 @@ int perf_output_begin(struct perf_output
* Userspace could choose to issue a mb() before updating the
* tail pointer. So that all reads will be completed before the
* write is issued.
+ *
+ * See perf_output_put_handle().
*/
tail = ACCESS_ONCE(rb->user_page->data_tail);
- smp_rmb();
+ smp_mb();
offset = head = local_read(&rb->head);
head += size;
if (unlikely(!perf_output_space(rb, tail, offset, head)))



\
 
 \ /
  Last update: 2013-11-18 21:01    [W:0.128 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site