lkml.org 
[lkml]   [2013]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] watchdog: davinci: reuse driver for keystone arch
Date
The keystone arch use the same IP watchdog, so add "ti,keystone-wdt"
compatible and correct identity.

The Keystone arch is using clocks in DT and source clock for watchdog
has to be specified, so add this to binding.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 11 +++++++++--
drivers/watchdog/Kconfig | 4 ++--
drivers/watchdog/davinci_wdt.c | 3 ++-
3 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index e450134..0f1aa99 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -1,16 +1,23 @@
-DaVinci Watchdog Timer (WDT) Controller
+Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller

Required properties:
-- compatible : Should be "ti,davinci-wdt"
+- compatible : Should be "ti,davinci-wdt" or "ti,keystone-wdt"
- reg : Should contain WDT registers location and length
+- clocks : phandle reference to the controller clock.
+ Required only for Keystone arch. See clock-bindings.txt

Optional properties:
- timeout-sec : Contains the watchdog timeout in seconds

+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
Examples:

wdt: wdt@2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
timeout-sec = <30>;
+ clocks = <&clkwdtimer0>;
};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d7db13d..addfc2c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -270,12 +270,12 @@ config IOP_WATCHDOG

config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
select WATCHDOG_CORE
select WATCHDOG_NOWAYOUT
help
Say Y here if to include support for the watchdog timer
- in the DaVinci DM644x/DM646x processors.
+ in the DaVinci DM644x/DM646x or Keystone processors.
To compile this driver as a module, choose M here: the
module will be called davinci_wdt.

diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 55deaf8..a6d365a 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -143,7 +143,7 @@ static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd)

static const struct watchdog_info davinci_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
- .identity = "DaVinci Watchdog",
+ .identity = "DaVinci/Keystone Watchdog",
};

static const struct watchdog_ops davinci_wdt_ops = {
@@ -212,6 +212,7 @@ static int davinci_wdt_remove(struct platform_device *pdev)

static const struct of_device_id davinci_wdt_of_match[] = {
{ .compatible = "ti,davinci-wdt", },
+ { .compatible = "ti,keystone-wdt", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-18 18:41    [W:0.108 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site