lkml.org 
[lkml]   [2013]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] I2C: busses: i2c-eg20t Do not print error message in syslog if no ACK received
On Sun, Nov 17, 2013 at 05:53:29PM +0100, Andreas Werner wrote:
> On Sun, Nov 17, 2013 at 01:18:09PM +0100, Wolfram Sang wrote:
> >
> > > Is there another reason why pch_i2c_getack returned EPROTO?
> > > May be ENXIO was introduced later?
> >
> > Imperfect review :)
> >
> > > I think we can just replace the -EIO with -ENXIO or do you want to pick up the return
> > > vale of pch_i2c_getack and return that ?
> >
> > The latter. As a rule of thumb, it is usually more sustainable to pass
> > through error codes. Overloading them should only be done when really
> > necessary IMO.
> >
> Ok, if that will be ok in pch_i2c_wait_for_check_xfer i will resend
> the patch.
>
> ret = pch_i2c_getack(adap);
>
> if (ret)
> pch_dbg(adap, "Receive NACK for slave address setting\n");
>
> return (int)ret;

Hmm, the cast looks ugly. Looking at the driver more closely, my
preferred solution would be to elimiate the getack function and just do
that directly in wait_for_check_xfer:

if (ioread32(adap->pch_base_address + PCH_I2CSR) & PCH_GETACK) {
pch_dbg ...
return -ENXIO;
}

Something like that...

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-11-17 18:21    [W:0.039 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site