lkml.org 
[lkml]   [2013]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] watchdog: w83627hf: Convert to watchdog infrastructure
Hi Guenter,

> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v4: Restore 'nowayout' module parameter
>
> The changes cause a trivial conflict with 'watchdog: w83627hf: Auto-detect
> IO address and supported chips'. Please let me know if I should re-send
> the entire series.
>
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/w83627hf_wdt.c | 218 +++++++++------------------------------
> 2 files changed, 50 insertions(+), 169 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index d1d53f3..dcaecd0 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -868,6 +868,7 @@ config VIA_WDT
> config W83627HF_WDT
> tristate "W83627HF/W83627DHG Watchdog Timer"
> depends on X86
> + select WATCHDOG_CORE
> ---help---
> This is the driver for the hardware watchdog on the W83627HF chipset
> as used in Advantech PC-9578 and Tyan S2721-533 motherboards
> diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
> index 92f1326..e204c2b 100644
> --- a/drivers/watchdog/w83627hf_wdt.c
> +++ b/drivers/watchdog/w83627hf_wdt.c
> @@ -1,6 +1,9 @@
> /*
> * w83627hf/thf WDT driver
> *
> + * (c) Copyright 2013 Guenter Roeck
> + * converted to watchdog infrastructure
> + *
> * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
> * added support for W83627THF.
> *
> @@ -31,31 +34,22 @@
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> #include <linux/types.h>
> -#include <linux/miscdevice.h>
> #include <linux/watchdog.h>
> -#include <linux/fs.h>
> #include <linux/ioport.h>
> #include <linux/notifier.h>
> #include <linux/reboot.h>
> #include <linux/init.h>
> -#include <linux/spinlock.h>
> #include <linux/io.h>
> -#include <linux/uaccess.h>
> -
>
> #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
> #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
>
> -static unsigned long wdt_is_open;
> -static char expect_close;
> -static DEFINE_SPINLOCK(io_lock);
> -
> /* You must set this - there is no sane way to probe for this board. */
> static int wdt_io = 0x2E;
> module_param(wdt_io, int, 0);
> MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
>
> -static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
> +static int timeout; /* in seconds */
> module_param(timeout, int, 0);
> MODULE_PARM_DESC(timeout,
> "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
> @@ -110,7 +104,7 @@ static void w83627hf_unselect_wd_register(void)
> /* tyan motherboards seem to set F5 to 0x4C ?
> * So explicitly init to appropriate value. */
>
> -static void w83627hf_init(void)
> +static void w83627hf_init(struct watchdog_device *wdog)
> {
> unsigned char t;
>
> @@ -120,8 +114,8 @@ static void w83627hf_init(void)
> t = inb_p(WDT_EFDR); /* read CRF6 */
> if (t != 0) {
> pr_info("Watchdog already running. Resetting timeout to %d sec\n",
> - timeout);
> - outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */
> + wdog->timeout);
> + outb_p(wdog->timeout, WDT_EFDR); /* Write back to CRF6 */
> }
>
> outb_p(0xF5, WDT_EFER); /* Select CRF5 */
> @@ -141,10 +135,8 @@ static void w83627hf_init(void)
> w83627hf_unselect_wd_register();
> }
>
> -static void wdt_set_time(int timeout)
> +static int wdt_set_time(unsigned int timeout)
> {
> - spin_lock(&io_lock);
> -
> w83627hf_select_wd_register();
>
> outb_p(0xF6, WDT_EFER); /* Select CRF6 */
> @@ -152,34 +144,30 @@ static void wdt_set_time(int timeout)
>
> w83627hf_unselect_wd_register();
>
> - spin_unlock(&io_lock);
> + return 0;
> }
>
> -static int wdt_ping(void)
> +static int wdt_start(struct watchdog_device *wdog)
> {
> - wdt_set_time(timeout);
> - return 0;
> + return wdt_set_time(wdog->timeout);
> }
>
> -static int wdt_disable(void)
> +static int wdt_stop(struct watchdog_device *wdog)
> {
> - wdt_set_time(0);
> - return 0;
> + return wdt_set_time(0);
> }
>
> -static int wdt_set_heartbeat(int t)
> +static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout)
> {
> - if (t < 1 || t > 255)
> - return -EINVAL;
> - timeout = t;
> + wdt_set_time(timeout);

Since the core code does a "ping()" after calling the wdt_set_timeout operation
you don't need the above line.

> + wdog->timeout = timeout;
> +
> return 0;
> }
>
> -static int wdt_get_time(void)
> +static unsigned int wdt_get_time(struct watchdog_device *wdog)
> {
> - int timeleft;
> -
> - spin_lock(&io_lock);
> + unsigned int timeleft;
>
> w83627hf_select_wd_register();
>
> @@ -188,124 +176,17 @@ static int wdt_get_time(void)
>
> w83627hf_unselect_wd_register();
>
> - spin_unlock(&io_lock);
> -
> return timeleft;
> }
>
> -static ssize_t wdt_write(struct file *file, const char __user *buf,
> - size_t count, loff_t *ppos)
> -{
> - if (count) {
> - if (!nowayout) {
> - size_t i;
> -
> - expect_close = 0;
> -
> - for (i = 0; i != count; i++) {
> - char c;
> - if (get_user(c, buf + i))
> - return -EFAULT;
> - if (c == 'V')
> - expect_close = 42;
> - }
> - }
> - wdt_ping();
> - }
> - return count;
> -}
> -
> -static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> -{
> - void __user *argp = (void __user *)arg;
> - int __user *p = argp;
> - int timeval;
> - static const struct watchdog_info ident = {
> - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
> - WDIOF_MAGICCLOSE,
> - .firmware_version = 1,
> - .identity = "W83627HF WDT",
> - };
> -
> - switch (cmd) {
> - case WDIOC_GETSUPPORT:
> - if (copy_to_user(argp, &ident, sizeof(ident)))
> - return -EFAULT;
> - break;
> - case WDIOC_GETSTATUS:
> - case WDIOC_GETBOOTSTATUS:
> - return put_user(0, p);
> - case WDIOC_SETOPTIONS:
> - {
> - int options, retval = -EINVAL;
> -
> - if (get_user(options, p))
> - return -EFAULT;
> - if (options & WDIOS_DISABLECARD) {
> - wdt_disable();
> - retval = 0;
> - }
> - if (options & WDIOS_ENABLECARD) {
> - wdt_ping();
> - retval = 0;
> - }
> - return retval;
> - }
> - case WDIOC_KEEPALIVE:
> - wdt_ping();
> - break;
> - case WDIOC_SETTIMEOUT:
> - if (get_user(timeval, p))
> - return -EFAULT;
> - if (wdt_set_heartbeat(timeval))
> - return -EINVAL;
> - wdt_ping();
> - /* Fall */
> - case WDIOC_GETTIMEOUT:
> - return put_user(timeout, p);
> - case WDIOC_GETTIMELEFT:
> - timeval = wdt_get_time();
> - return put_user(timeval, p);
> - default:
> - return -ENOTTY;
> - }
> - return 0;
> -}
> -
> -static int wdt_open(struct inode *inode, struct file *file)
> -{
> - if (test_and_set_bit(0, &wdt_is_open))
> - return -EBUSY;
> - /*
> - * Activate
> - */
> -
> - wdt_ping();
> - return nonseekable_open(inode, file);
> -}
> -
> -static int wdt_close(struct inode *inode, struct file *file)
> -{
> - if (expect_close == 42)
> - wdt_disable();
> - else {
> - pr_crit("Unexpected close, not stopping watchdog!\n");
> - wdt_ping();
> - }
> - expect_close = 0;
> - clear_bit(0, &wdt_is_open);
> - return 0;
> -}
> -
> /*
> * Notifier for system down
> */
> -
> static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
> void *unused)
> {
> if (code == SYS_DOWN || code == SYS_HALT)
> - wdt_disable(); /* Turn the WDT off */
> + wdt_set_time(0); /* Turn the WDT off */
>
> return NOTIFY_DONE;
> }
> @@ -314,19 +195,26 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
> * Kernel Interfaces
> */
>
> -static const struct file_operations wdt_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .write = wdt_write,
> - .unlocked_ioctl = wdt_ioctl,
> - .open = wdt_open,
> - .release = wdt_close,
> +static struct watchdog_info wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "W83627HF Watchdog",
> +};
> +
> +static struct watchdog_ops wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = wdt_start,
> + .stop = wdt_stop,
> + .ping = wdt_start,

This one is not needed since it's the same as start.

> + .set_timeout = wdt_set_timeout,
> + .get_timeleft = wdt_get_time,
> };
>
> -static struct miscdevice wdt_miscdev = {
> - .minor = WATCHDOG_MINOR,
> - .name = "watchdog",
> - .fops = &wdt_fops,
> +static struct watchdog_device wdt_dev = {
> + .info = &wdt_info,
> + .ops = &wdt_ops,
> + .timeout = WATCHDOG_TIMEOUT,
> + .min_timeout = 1,
> + .max_timeout = 255,
> };
>
> /*
> @@ -344,19 +232,15 @@ static int __init wdt_init(void)
>
> pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
>
> - if (wdt_set_heartbeat(timeout)) {
> - wdt_set_heartbeat(WATCHDOG_TIMEOUT);
> - pr_info("timeout value must be 1 <= timeout <= 255, using %d\n",
> - WATCHDOG_TIMEOUT);
> - }
> -
> if (!request_region(wdt_io, 1, WATCHDOG_NAME)) {
> pr_err("I/O address 0x%04x already in use\n", wdt_io);
> - ret = -EIO;
> - goto out;
> + return -EIO;
> }
>
> - w83627hf_init();
> + watchdog_init_timeout(&wdt_dev, timeout, NULL);
> + watchdog_set_nowayout(&wdt_dev, nowayout);
> +
> + w83627hf_init(&wdt_dev);
>
> ret = register_reboot_notifier(&wdt_notifier);
> if (ret != 0) {
> @@ -364,28 +248,25 @@ static int __init wdt_init(void)
> goto unreg_regions;
> }
>
> - ret = misc_register(&wdt_miscdev);
> - if (ret != 0) {
> - pr_err("cannot register miscdev on minor=%d (err=%d)\n",
> - WATCHDOG_MINOR, ret);
> + ret = watchdog_register_device(&wdt_dev);
> + if (ret)
> goto unreg_reboot;
> - }
>
> pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
> - timeout, nowayout);
> + wdt_dev.timeout, nowayout);
>
> -out:
> return ret;
> +
> unreg_reboot:
> unregister_reboot_notifier(&wdt_notifier);
> unreg_regions:
> release_region(wdt_io, 1);
> - goto out;
> + return ret;
> }
>
> static void __exit wdt_exit(void)
> {
> - misc_deregister(&wdt_miscdev);
> + watchdog_unregister_device(&wdt_dev);
> unregister_reboot_notifier(&wdt_notifier);
> release_region(wdt_io, 1);
> }
> @@ -396,4 +277,3 @@ module_exit(wdt_exit);
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
> MODULE_DESCRIPTION("w83627hf/thf WDT driver");
> -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

I will add this patch with above two small corrections to linux-watchdog-next.

Kind regards,
Wim.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-11-17 20:21    [W:0.067 / U:3.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site