lkml.org 
[lkml]   [2013]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 12/23] mfd: omap-usb-tll: raw read and write endian fix
Date
From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
drivers/mfd/omap-usb-tll.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index e59ac4c..15bcd93 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -121,22 +121,22 @@ static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */

static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
{
- __raw_writel(val, base + reg);
+ writel_relaxed(val, base + reg);
}

static inline u32 usbtll_read(void __iomem *base, u32 reg)
{
- return __raw_readl(base + reg);
+ return readl_relaxed(base + reg);
}

static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
{
- __raw_writeb(val, base + reg);
+ writeb_relaxed(val, base + reg);
}

static inline u8 usbtll_readb(void __iomem *base, u8 reg)
{
- return __raw_readb(base + reg);
+ return readb_relaxed(base + reg);
}

/*-------------------------------------------------------------------------*/
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-16 01:21    [W:0.034 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site