Messages in this thread Patch in this message | | | From | Sebastian Hesselbarth <> | Subject | [PATCH 2/2] ARM: kirkwood: mark guruplug sdio as non-removable | Date | Fri, 15 Nov 2013 15:20:25 +0100 |
| |
Globalscale Guruplug has AW-GH381 WiFi/BT on sdio which is always present and cannot be detected in any way. Therefore, mark the node as non-removable instead of broken-cd. While at it, also put a note about connected WiFi/BT chip above.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- .../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 6548b9d..4ebe720 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -65,10 +65,10 @@ nr-ports = <1>; }; + /* AzureWave AW-GH381 WiFi/BT */ mvsdio@90000 { status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; + non-removable; }; }; -- 1.7.2.5
| |