lkml.org 
[lkml]   [2013]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [3.11.4] Thunderbolt/PCI unplug oops in pci_pme_list_scan
On Thu, Oct 24, 2013 at 09:33:50PM -0600, Bjorn Helgaas wrote:
> On Wed, Oct 23, 2013 at 11:53 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> > On Tue, Oct 22, 2013 at 8:32 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> >> On Thu, Oct 17, 2013 at 7:59 AM, Andreas Noever <andreas.noever@gmail.com> wrote:
> >>> On Wed, Oct 16, 2013 at 10:21 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> >>>> On Tue, Oct 15, 2013 at 03:44:52AM +0100, Matthew Garrett wrote:
> >>>>> On Mon, Oct 14, 2013 at 05:50:38PM -0600, Bjorn Helgaas wrote:
> >>>>> > On Mon, Oct 14, 2013 at 4:47 PM, Andreas Noever <andreas.noever@gmail.com> wrote:
> >>>>> > > When I unplug the Thunderbolt ethernet adapter on my MacBookPro Linux
> >>>>> > > crashes a few seconds later. Using
> >>>>> > > echo 1 > /sys/bus/pci/devices/0000:08:00.0/remove
> >>>>> > > to remove a bridge two levels above the device triggers the fault immediately:
>
> >>>> We save a pci_dev pointer in the pci_pme_list, which of course has a
> >>>> longer lifetime than the pci_dev itself, but we don't acquire a reference
> >>>> on it, so I suspect the pci_dev got released before we got around to
> >>>> doing the pci_pme_list_scan().
> >>>>
> >>>> Andreas, can you try the patch below? It's against v3.12-rc2, but it
> >>>> should apply to v3.11, too.
> >>>
> >>> I have tested your patch against 3.11 where it solves the problem. Thanks!
> >>>
> >>> Unfortunately I could not reproduce the problem in 3.12-rc5. I only
> >>> get the following warning (and no crash):
> >>>
> >>> tg3 0000:0a:00.0: PME# disabled
> >>> pcieport 0000:09:00.0: PME# disabled
> >>> pciehp 0000:09:00.0:pcie24: unloading service driver pciehp
> >>> pci_bus 0000:0a: dev 00, dec refcount to 0
> >>> pci_bus 0000:0a: dev 00, released physical slot 9
> >>> ------------[ cut here ]------------
> >>> WARNING: CPU: 0 PID: 122 at drivers/pci/pci.c:1430
> >>> pci_disable_device+0x84/0x90()
> >>> Device pcieport
> >>> disabling already-disabled device
> >>> ...
>
> >>> Bisection points to 928bea964827d7824b548c1f8e06eccbbc4d0d7d .
> >>
> >> This is "PCI: Delay enabling bridges until they're needed" by Yinghai.
> >
> > that double disabling should be addressed by:
> >
> > https://lkml.org/lkml/2013/4/25/608
> >
> > [PATCH] PCI: Remove duplicate pci_disable_device for pcie port
>
> I'll look at that patch again. I had some questions about it the
> first time, but perhaps it makes more sense after 928bea9648 has been
> applied.

Bjorn,

Are there any plans to apply the above patch?

I'm seeing that warning on all my TBT test machines:

[ 122.914180] pcieport 0000:06:05.0: PME# disabled
[ 122.915386] ------------[ cut here ]------------
[ 122.916513] WARNING: CPU: 0 PID: 1060 at drivers/pci/pci.c:1430 pci_disable_device+0x7c/0x90()
[ 122.917589] Device pcieport
[ 122.917589] disabling already-disabled device
[ 122.918681] Modules linked in:
[ 122.920803] CPU: 0 PID: 1060 Comm: kworker/0:2 Not tainted 3.12.0 #193
[ 122.921877] Hardware name: /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013
[ 122.922989] Workqueue: kacpi_hotplug hotplug_event_work
[ 122.924097] 0000000000000009 ffff88006de81ab0 ffffffff817ca961 ffff88006de81af8
[ 122.925241] ffff88006de81ae8 ffffffff810445c8 ffff88006ea15800 ffff88006ea15800
[ 122.926385] ffffffff81c5ac80 ffff88006ea14098 ffff88006eb35c28 ffff88006de81b48
[ 122.927519] Call Trace:
[ 122.928626] [<ffffffff817ca961>] dump_stack+0x45/0x56
[ 122.929757] [<ffffffff810445c8>] warn_slowpath_common+0x78/0xa0
[ 122.930884] [<ffffffff81044637>] warn_slowpath_fmt+0x47/0x50
[ 122.932003] [<ffffffff812deb3d>] ? do_pci_disable_device+0x4d/0x60
[ 122.933116] [<ffffffff812debcc>] pci_disable_device+0x7c/0x90
[ 122.934235] [<ffffffff812ebfb5>] pcie_portdrv_remove+0x15/0x20
[ 122.935345] [<ffffffff812e0318>] pci_device_remove+0x28/0x60
[ 122.936442] [<ffffffff81424f24>] __device_release_driver+0x64/0xd0
[ 122.937543] [<ffffffff81424fae>] device_release_driver+0x1e/0x30
[ 122.938636] [<ffffffff81424837>] bus_remove_device+0xf7/0x140
[ 122.939718] [<ffffffff81421575>] device_del+0x135/0x1d0
[ 122.940806] [<ffffffff812db4c4>] pci_stop_bus_device+0x94/0xa0
[ 122.941890] [<ffffffff812db46b>] pci_stop_bus_device+0x3b/0xa0
[ 122.942957] [<ffffffff812db5cd>] pci_stop_and_remove_bus_device+0xd/0x20
[ 122.944004] [<ffffffff812f3992>] trim_stale_devices+0x62/0xc0
[ 122.945034] [<ffffffff812f39db>] trim_stale_devices+0xab/0xc0
[ 122.946042] [<ffffffff812f39db>] trim_stale_devices+0xab/0xc0
[ 122.947034] [<ffffffff812f3dbe>] acpiphp_check_bridge+0x7e/0xd0
[ 122.948036] [<ffffffff812f4bf2>] hotplug_event+0xf2/0x230
[ 122.949042] [<ffffffff8130dcf3>] ? acpi_os_release_object+0x9/0xd
[ 122.950054] [<ffffffff812f4d52>] hotplug_event_work+0x22/0x60
[ 122.951067] [<ffffffff8105da2a>] process_one_work+0x17a/0x430
[ 122.952084] [<ffffffff8105e619>] worker_thread+0x119/0x390
[ 122.953095] [<ffffffff8105e500>] ? manage_workers.isra.25+0x2a0/0x2a0
[ 122.954107] [<ffffffff810647bb>] kthread+0xbb/0xc0
[ 122.955115] [<ffffffff81064700>] ? kthread_create_on_node+0x110/0x110
[ 122.956136] [<ffffffff817db3fc>] ret_from_fork+0x7c/0xb0
[ 122.957141] [<ffffffff81064700>] ? kthread_create_on_node+0x110/0x110
[ 122.958145] ---[ end trace a0dcbb3b178e4755 ]---


\
 
 \ /
  Last update: 2013-11-15 13:01    [W:1.416 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site