lkml.org 
[lkml]   [2013]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/10] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID
Date
Using previously added infrastructure we can now extract a device's JEDEC
ID, compare it to a list of known and supported devices and make assumptions
based on known characteristics of a given chip.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 230024c..42dd4d9 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -357,6 +357,7 @@ static int stfsm_read_jedec(struct stfsm *fsm, uint8_t *const jedec)

static struct flash_info * stfsm_jedec_probe(struct stfsm *fsm)
{
+ struct flash_info *info;
u16 ext_jedec;
u32 jedec;
u8 id[5];
@@ -380,6 +381,15 @@ static struct flash_info * stfsm_jedec_probe(struct stfsm *fsm)
dev_dbg(fsm->dev, "JEDEC = 0x%08x [%02x %02x %02x %02x %02x]\n",
jedec, id[0], id[1], id[2], id[3], id[4]);

+ for (info = flash_types; info->name; info++) {
+ if (info->jedec_id == jedec) {
+ if (info->ext_id && info->ext_id != ext_jedec)
+ continue;
+ return info;
+ }
+ }
+ dev_err(fsm->dev, "Unrecognized JEDEC id %06x\n", jedec);
+
return NULL;
}

@@ -490,6 +500,7 @@ static int stfsm_init(struct stfsm *fsm)
static int stfsm_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct flash_info *info;
struct resource *res;
struct stfsm *fsm;
int ret;
@@ -536,7 +547,9 @@ static int stfsm_probe(struct platform_device *pdev)
}

/* Detect SPI FLASH device */
- stfsm_jedec_probe(fsm);
+ info = stfsm_jedec_probe(fsm);
+ if (!info)
+ return -ENODEV;

platform_set_drvdata(pdev, fsm);

@@ -545,6 +558,15 @@ static int stfsm_probe(struct platform_device *pdev)
fsm->mtd.writesize = 4;
fsm->mtd.writebufsize = fsm->mtd.writesize;
fsm->mtd.flags = MTD_CAP_NORFLASH;
+ fsm->mtd.size = info->sector_size * info->n_sectors;
+ fsm->mtd.erasesize = info->sector_size;
+
+ dev_err(&pdev->dev,
+ "Found serial flash device: %s\n"
+ " size = %llx (%lldMiB) erasesize = 0x%08x (%uKiB)\n",
+ info->name,
+ (long long)fsm->mtd.size, (long long)(fsm->mtd.size >> 20),
+ fsm->mtd.erasesize, (fsm->mtd.erasesize >> 10));

return mtd_device_parse_register(&fsm->mtd, NULL, NULL, NULL, 0);
}
--
1.8.1.2


\
 
 \ /
  Last update: 2013-11-14 17:41    [W:0.103 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site