lkml.org 
[lkml]   [2013]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC] net: of_mdio: Scan PHYs which have device_type set to ethernet-phy
Date
According to Documentation/devicetree/bindings/net/phy.txt device_type
property of PHY nodes is mandatory, which should be set to
"ethernet-phy". This patch adds check in scanning phys and only scans
node which have device-type set to "ethernet-phy".

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
---
drivers/of/of_mdio.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index d5a57a9..78c53c7 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -57,6 +57,9 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)

/* Loop over the child nodes and register a phy_device for each one */
for_each_available_child_of_node(np, child) {
+ /* A PHY must have device_type set to "ethernet-phy" */
+ if (of_node_cmp(child->type, "ethernet-phy"))
+ continue;
/* A PHY must have a reg property in the range [0-31] */
paddr = of_get_property(child, "reg", &len);
if (!paddr || len < sizeof(*paddr)) {
@@ -112,6 +115,10 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)

/* auto scan for PHYs with empty reg property */
for_each_available_child_of_node(np, child) {
+ /* A PHY must have device_type set to "ethernet-phy" */
+ if (of_node_cmp(child->type, "ethernet-phy"))
+ continue;
+
/* Skip PHYs with reg property set */
paddr = of_get_property(child, "reg", &len);
if (paddr)
--
1.7.6.5


\
 
 \ /
  Last update: 2013-11-14 16:41    [W:0.051 / U:4.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site