lkml.org 
[lkml]   [2013]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V4 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP
On Thu, Nov 14, 2013 at 12:18:48PM +0000, Sricharan R wrote:
> Some socs have a large number of interrupts requests to service
> the needs of its many peripherals and subsystems. All of the
> interrupt lines from the subsystems are not needed at the same
> time, so they have to be muxed to the irq-controller appropriately.
> In such places a interrupt controllers are preceded by an CROSSBAR
> that provides flexibility in muxing the device requests to the controller
> inputs.
>
> This driver takes care a allocating a free irq and then configuring the
> crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should
> be called right before the irqchip_init, so that it is setup to handle the
> irqchip callbacks.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Signed-off-by: Sricharan R <r.sricharan@ti.com>
> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion)
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> [V2] Addressed Thomas Gleixner <tglx@linutronix.de> comments
> and renamed the bindings as per Kumar Gala <galak@codeaurora.org>
> comments.
> [V3] Changed static inline const to static inline int and removed
> unnecessary variable initialization as per
> Thomas Gleixner <tglx@linutronix.de>. Updated commit tags
> [V4] Renamed crossbar_init as irqcrossbar_init as per
> Rajendra Nayak <rnayak@ti.com> suggestion.
>
> .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++
> drivers/irqchip/Kconfig | 8 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-crossbar.c | 206 ++++++++++++++++++++
> include/linux/irqchip/irq-crossbar.h | 11 ++
> 5 files changed, 253 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt
> create mode 100644 drivers/irqchip/irq-crossbar.c
> create mode 100644 include/linux/irqchip/irq-crossbar.h
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> new file mode 100644
> index 0000000..fb88585
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> @@ -0,0 +1,27 @@
> +Some socs have a large number of interrupts requests to service
> +the needs of its many peripherals and subsystems. All of the
> +interrupt lines from the subsystems are not needed at the same
> +time, so they have to be muxed to the irq-controller appropriately.
> +In such places a interrupt controllers are preceded by an CROSSBAR
> +that provides flexibility in muxing the device requests to the controller
> +inputs.
> +
> +Required properties:
> +- compatible : Should be "ti,irq-crossbar"
> +- reg: Base address and the size of the crossbar registers.
> +- ti,max-irqs: Total number of irqs available at the interrupt controller.
> +- ti,reg-size: Size of a individual register in bytes. Every individual
> + register is assumed to be of same size. Valid sizes are 1, 2, 4.
> +- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
> + crossbar. These interrupt lines are reserved in the soc,
> + so crossbar bar driver should not consider them as free
> + lines.
The combination of the ti,max-irqs and ti,irqs-reserved properties seems
backwards to me. Why can we not describe the set of IRQs that _can_ be
used?

> +
> +Examples:
> + crossbar_mpu: @4a020000 {
> + compatible = "ti,irq-crossbar";
> + reg = <0x4a002a48 0x130>;
> + ti,max-irqs = <160>;
> + ti,reg-size = <2>;
> + ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
> + };

[...]

> + /* Get and mark reserved irqs */
> + irqsr = of_get_property(node, "ti,irqs-reserved", &size);
> + if (irqsr) {
> + size /= sizeof(__be32);
> +
> + for (i = 0; i < size; i++) {
> + entry = be32_to_cpup(irqsr + i);
> + if (entry > max) {
> + pr_err("Invalid reserved entry\n");
> + goto err3;
> + }
> + cb->irq_map[entry] = 0;
> + }
> + }

Don't deal with the raw DTB. Use of_property_read_u32_index.

> +
> + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
> + if (!cb->register_offsets)
> + goto err3;
> +
> + of_property_read_u32(node, "ti,reg-size", &size);

If "ti,reg-size" isn't present, size is uninitialized. Please check the
return value of of_property_read_u32.

Thanks,
Mark.


\
 
 \ /
  Last update: 2013-11-14 15:21    [W:0.094 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site