lkml.org 
[lkml]   [2013]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt: binding documentation for isp1704 charger
Date
Add devicetree binding documentation for isp1704-charger.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
Documentation/devicetree/bindings/power/isp1704.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/isp1704.txt

diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/isp1704.txt
new file mode 100644
index 0000000..bbeec11
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/isp1704.txt
@@ -0,0 +1,17 @@
+Binding for NXP ISP1704 USB Charger Detection
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "nxp,isp1704"
+- nxp,enable-gpio: Should contain a phandle to the
+ GPIO pin connected to the chip's enable pin.
+- usb-phy: Should contain a phandle to the USB PHY
+ the ISP1704 is connected to.
+
+Example:
+
+isp1704 {
+ compatible = "nxp,isp1704";
+ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+ usb-phy = <&usb2_phy>;
+};
--
1.8.4.2


\
 
 \ /
  Last update: 2013-11-14 14:01    [W:0.193 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site