lkml.org 
[lkml]   [2013]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V4 0/3] ARM: DTS: DRA7: Updates for adding crossbar device
Date
Some socs have a large number of interrupts requests to service
the needs of its many peripherals and subsystems. All of the interrupt
requests lines from the subsystems are not needed at the same
time, so they have to be muxed to the controllers appropriately.
In such places a interrupt controllers are preceded by an
IRQ CROSSBAR that provides flexibility in muxing the device interrupt
requests to the controller inputs.

The driver support for the same was added here.
http://marc.info/?l=linux-omap&m=138443167321614&w=2

The dts file update to support the crossbar device and convert
peripheral irq numbers to crossbar number are added here.
This series was originally a part of the series [1] and now split
to keep the DTS updates separately as per comments from
Santosh Shilimkar <santosh.shilimkar@ti.com>

Applied this series on top of
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.13/dts

[1] http://www.kernelhub.org/?msg=356470&p=2

Sricharan R (3):
ARM: DTS: DRA: Add crossbar device binding
ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar
inputs
ARM: DTS: DRA7: Add routable-irqs property for gic node

arch/arm/boot/dts/dra7.dtsi | 95 +++++++++++++++++++++++--------------------
1 file changed, 52 insertions(+), 43 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2013-11-14 13:41    [W:0.073 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site