lkml.org 
[lkml]   [2013]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/6] ARM: at91: use new at91 clks for samad3 SoCs
Date
Hello,

This patch series moves sama5d3 SoCs and boards to the new at91 clk framework
(based on common clk framework).

This patch series depends on following patch series:
1) "ARM: at91/dt: split sama5d3 definition" (v1)
3) "ARM: at91: move to common clk framework" (v5)

Best Regards,

Boris

Changes since v2:
- rework dt bindings:
* replace "atmel,clk-id" property by the standard "reg" property
* reference system, peripheral and programmable clks using the direct
clk node instead of the parent node plus a clk id
- add usb_clk to usb ehci controller node

Changes since v1:
- remove references to peripheral id macros
- remove old clk definitions after moving to new clk framework

Boris BREZILLON (6):
ARM: at91: prepare sama5 dt boards transition to common clk
ARM: at91: prepare common clk transition for sama5d3 SoC
ARM: at91/dt: define sama5d3 clocks
ARM: at91/dt: define sama5d3xek's main clk frequency
ARM: at91: move sama5d3 SoC to common clk
ARM: at91/dt: remove old clk material

arch/arm/boot/dts/sama5d3.dtsi | 379 ++++++++++++++++++++++++++++++++++-
arch/arm/boot/dts/sama5d3_can.dtsi | 20 ++
arch/arm/boot/dts/sama5d3_emac.dtsi | 11 +
arch/arm/boot/dts/sama5d3_gmac.dtsi | 11 +
arch/arm/boot/dts/sama5d3_lcd.dtsi | 17 ++
arch/arm/boot/dts/sama5d3_mci2.dtsi | 12 ++
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 12 ++
arch/arm/boot/dts/sama5d3_uart.dtsi | 21 ++
arch/arm/boot/dts/sama5d3xcm.dtsi | 17 +-
arch/arm/mach-at91/Kconfig | 1 -
arch/arm/mach-at91/board-dt-sama5.c | 10 +-
arch/arm/mach-at91/sama5d3.c | 342 -------------------------------
12 files changed, 497 insertions(+), 356 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2013-11-13 09:41    [W:0.500 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site