lkml.org 
[lkml]   [2013]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mfd: rtsx: add card reader rtl8402
Hi Lee

I'm trying to merge the common code into a single function
rtl8411_init_params(), but different chips may use a different
rtlxxx_pcr_ops even they have much the same. This is because the
ops may be called frequently.

Yet I'm trying to use Regulator Framework, it will make a
somewhat big change , and I will add it in a later time.

So, I wanna to send the merged patch first, is that ok?

On 11/08/2013 05:56 PM, Lee Jones wrote:
> On Fri, 01 Nov 2013, micky_ching@realsil.com.cn wrote:
>
>> From: Micky Ching <micky_ching@realsil.com.cn>
>>
>> Add card reader rtl8042, rtl8402 is much like rtl8411, so just add it to
>> rtl8411.c
>>
>> Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
>> ---
>> drivers/mfd/rtl8411.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++
>> drivers/mfd/rtsx_pcr.c | 5 ++++
>> drivers/mfd/rtsx_pcr.h | 1 +
>> 3 files changed, 68 insertions(+)
> Sorry Micky, but I'm not accepting this.
>
> This patch adds 62 lines of duplicated code, with only a few
> variations. Please find a way to generify the driver. Also I think we
> should consider doing the voltage stuff using the Regulator Framework.
>
>> diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
>> index 5280135..9d37dd6 100644
>> --- a/drivers/mfd/rtl8411.c
>> +++ b/drivers/mfd/rtl8411.c
>> @@ -498,3 +498,65 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr)
>> rtl8411b_qfn64_ms_pull_ctl_disable_tbl;
>> }
>> }
>> +
>> +static int rtl8402_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
>> +{
>> + u8 mask, val;
>> + int err;
>> +
>> + mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8402) | BPP_PAD_MASK;
>> + if (voltage == OUTPUT_3V3) {
>> + err = rtsx_pci_write_register(pcr,
>> + SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
>> + if (err < 0)
>> + return err;
>> + val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8402) | BPP_PAD_3V3;
>> + } else if (voltage == OUTPUT_1V8) {
>> + err = rtsx_pci_write_register(pcr,
>> + SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
>> + if (err < 0)
>> + return err;
>> + val = (BPP_ASIC_2V0 << BPP_TUNED18_SHIFT_8402) | BPP_PAD_1V8;
>> + } else {
>> + return -EINVAL;
>> + }
>> +
>> + return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
>> +}
>> +
>> +static const struct pcr_ops rtl8402_pcr_ops = {
>> + .fetch_vendor_settings = rtl8411_fetch_vendor_settings,
>> + .extra_init_hw = rtl8411_extra_init_hw,
>> + .optimize_phy = NULL,
>> + .turn_on_led = rtl8411_turn_on_led,
>> + .turn_off_led = rtl8411_turn_off_led,
>> + .enable_auto_blink = rtl8411_enable_auto_blink,
>> + .disable_auto_blink = rtl8411_disable_auto_blink,
>> + .card_power_on = rtl8411_card_power_on,
>> + .card_power_off = rtl8411_card_power_off,
>> + .switch_output_voltage = rtl8402_switch_output_voltage,
>> + .cd_deglitch = rtl8411_cd_deglitch,
>> + .conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
>> + .force_power_down = rtl8411_force_power_down,
>> +};
>> +
>> +void rtl8402_init_params(struct rtsx_pcr *pcr)
>> +{
>> + pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
>> + pcr->num_slots = 2;
>> + pcr->ops = &rtl8402_pcr_ops;
>> +
>> + pcr->flags = 0;
>> + pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
>> + pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
>> + pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
>> + pcr->aspm_en = ASPM_L1_EN;
>> + pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
>> + pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
>> +
>> + pcr->ic_version = rtl8411_get_ic_version(pcr);
>> + pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
>> + pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
>> + pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
>> + pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
>> +}
>> diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
>> index 11e20af..93fabc7 100644
>> --- a/drivers/mfd/rtsx_pcr.c
>> +++ b/drivers/mfd/rtsx_pcr.c
>> @@ -56,6 +56,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
>> { PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
>> { PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
>> { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
>> + { PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
>> { PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
>> { 0, }
>> };
>> @@ -1046,6 +1047,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
>> rts5229_init_params(pcr);
>> break;
>>
>> + case 0x5286:
>> + rtl8402_init_params(pcr);
>> + break;
>> +
>> case 0x5289:
>> rtl8411_init_params(pcr);
>> break;
>> diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
>> index 947e79b..8cac8db 100644
>> --- a/drivers/mfd/rtsx_pcr.h
>> +++ b/drivers/mfd/rtsx_pcr.h
>> @@ -29,6 +29,7 @@
>>
>> void rts5209_init_params(struct rtsx_pcr *pcr);
>> void rts5229_init_params(struct rtsx_pcr *pcr);
>> +void rtl8402_init_params(struct rtsx_pcr *pcr);
>> void rtl8411_init_params(struct rtsx_pcr *pcr);
>> void rts5227_init_params(struct rtsx_pcr *pcr);
>> void rts5249_init_params(struct rtsx_pcr *pcr);


--
Best Regards
Micky.



\
 
 \ /
  Last update: 2013-11-13 02:41    [W:0.326 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site