lkml.org 
[lkml]   [2013]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 08/17] clk: at91: add PMC system clocks
Date
This patch adds new at91 system clock implementation using common clk
framework.

Some peripherals need to enable a "system" clock in order to work properly.
Each system clock is given an id based on the bit position in SCER/SCDR
registers.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/clk-system.c | 137 +++++++++++++++++++++++++++++++++++++++++
drivers/clk/at91/pmc.c | 5 ++
drivers/clk/at91/pmc.h | 3 +
4 files changed, 146 insertions(+)
create mode 100644 drivers/clk/at91/clk-system.c

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index e28fb2b..c2b7068 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -4,3 +4,4 @@

obj-y += pmc.o
obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
+obj-y += clk-system.o
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
new file mode 100644
index 0000000..1c086f4
--- /dev/null
+++ b/drivers/clk/at91/clk-system.c
@@ -0,0 +1,137 @@
+/*
+ * drivers/clk/at91/clk-system.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define SYSTEM_MAX_ID 31
+
+#define SYSTEM_MAX_NAME_SZ 32
+
+#define to_clk_system(hw) container_of(hw, struct clk_system, hw)
+struct clk_system {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ u8 id;
+};
+
+static int clk_system_enable(struct clk_hw *hw)
+{
+ struct clk_system *sys = to_clk_system(hw);
+ struct at91_pmc *pmc = sys->pmc;
+
+ pmc_write(pmc, AT91_PMC_SCER, 1 << sys->id);
+ return 0;
+}
+
+static void clk_system_disable(struct clk_hw *hw)
+{
+ struct clk_system *sys = to_clk_system(hw);
+ struct at91_pmc *pmc = sys->pmc;
+
+ pmc_write(pmc, AT91_PMC_SCDR, 1 << sys->id);
+}
+
+static int clk_system_is_enabled(struct clk_hw *hw)
+{
+ struct clk_system *sys = to_clk_system(hw);
+ struct at91_pmc *pmc = sys->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_SCSR) & (1 << sys->id));
+}
+
+static const struct clk_ops system_ops = {
+ .enable = clk_system_enable,
+ .disable = clk_system_disable,
+ .is_enabled = clk_system_is_enabled,
+};
+
+static struct clk * __init
+at91_clk_register_system(struct at91_pmc *pmc, const char *name,
+ const char *parent_name, u8 id)
+{
+ struct clk_system *sys;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!parent_name || id > SYSTEM_MAX_ID)
+ return ERR_PTR(-EINVAL);
+
+ sys = kzalloc(sizeof(*sys), GFP_KERNEL);
+ if (!sys)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &system_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ /*
+ * CLK_IGNORE_UNUSED is used to avoid ddrck switch off.
+ * TODO : we should implement a driver supporting at91 ddr controller
+ * (see drivers/memory) which would request and enable the ddrck clock.
+ * When this is done we will be able to remove CLK_IGNORE_UNUSED flag.
+ */
+ init.flags = CLK_IGNORE_UNUSED;
+
+ sys->id = id;
+ sys->hw.init = &init;
+ sys->pmc = pmc;
+
+ clk = clk_register(NULL, &sys->hw);
+ if (IS_ERR(clk))
+ kfree(sys);
+
+ return clk;
+}
+
+static void __init
+of_at91_clk_sys_setup(struct device_node *np, struct at91_pmc *pmc)
+{
+ int num;
+ u32 id;
+ struct clk *clk;
+ const char *name;
+ struct device_node *sysclknp;
+ const char *parent_name;
+
+ num = of_get_child_count(np);
+ if (num > (SYSTEM_MAX_ID + 1))
+ return;
+
+ for_each_child_of_node(np, sysclknp) {
+ if (of_property_read_u32(sysclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = sysclknp->name;
+
+ parent_name = of_clk_get_parent_name(sysclknp, 0);
+
+ clk = at91_clk_register_system(pmc, name, parent_name, id);
+ if (IS_ERR(clk))
+ continue;
+
+ of_clk_add_provider(sysclknp, of_clk_src_simple_get, clk);
+ }
+}
+
+void __init of_at91rm9200_clk_sys_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_sys_setup(np, pmc);
+}
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index d9975e7..6adc5be 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -266,6 +266,11 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
.compatible = "atmel,at91sam9x5-clk-master",
.data = of_at91sam9x5_clk_master_setup,
},
+ /* System clocks */
+ {
+ .compatible = "atmel,at91rm9200-clk-system",
+ .data = of_at91rm9200_clk_sys_setup,
+ },
{ /*sentinel*/ }
};

diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index be5c964..9c8a397 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -77,4 +77,7 @@ extern void __init of_at91rm9200_clk_master_setup(struct device_node *np,
extern void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
struct at91_pmc *pmc);

+extern void __init of_at91rm9200_clk_sys_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
#endif /* __PMC_H_ */
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-12 23:21    [W:0.157 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site