Messages in this thread | | | Date | Tue, 12 Nov 2013 04:14:15 -0500 | Subject | Re: 3.12: raid-1 mismatch_cnt question | From | Justin Piszcz <> |
| |
On Mon, Nov 11, 2013 at 7:39 PM, Brad Campbell <lists2009@fnarfbargle.com> wrote: > On 11/07/2013 06:54 PM, Justin Piszcz wrote: >> >> On Mon, Nov 4, 2013 at 5:25 AM, Justin Piszcz <jpiszcz@lucidpixels.com> >> wrote: >>> >>> Hi, >>> >>> I run two SSDs in a RAID-1 configuration and I have a swap partition on a >>> third SSD. Over time, the mismatch_cnt between the two devices grows >>> higher >>> and higher. >>> > > Are both SSD's identical? Do you have discard enabled on the filesystem? Yes (2 x Intel SSDSC2CW240A3) & yes )/dev/root on / type ext4 (rw,relatime,discard,data=ordered))
> > The reason I ask is I have a RAID10 comprised of 3 Intel and 3 Samsung > SSD's. The Intel return 0 after TRIM while the Samsung don't, so I _always_ > have a massive mismatch_cnt after I run fstrim. I never use a repair > operation as it's just going to re-write the already trimmed sectors. Very interesting and good to know!
Justin.
| |