lkml.org 
[lkml]   [2013]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] usb: chipidea: msm: Add device tree binding information
Date
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: devicetree@vger.kernel.org
---
.../devicetree/bindings/usb/msm-hsusb.txt | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index 5ea26c6..0a85eba 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -15,3 +15,19 @@ Example EHCI controller device node:
usb-phy = <&usb_otg>;
};

+CI13xxx (Chipidea) USB controllers
+
+Required properties:
+- compatible: should contain "qcom,ci-hdrc"
+- reg: offset and length of the register set in the memory map
+- interrupts: interrupt-specifier for the controller interrupt.
+- usb-phy: phandle for the PHY device
+- dr_mode: Sould be "peripheral"
+
+ gadget@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <0 134 0>;
+ usb-phy = <&usb_otg>;
+ };
\ No newline at end of file
--
1.7.9.5


\
 
 \ /
  Last update: 2013-11-11 15:41    [W:0.177 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site