lkml.org 
[lkml]   [2013]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] thinkpad_acpi: Add support for controlling charge thresholds
Date
Add support for battery charge thresholds in new Sandy Bridge and Ivy Bridge
ThinkPads. Based on the unofficial documentation in tpacpi-bat.

The threshold files support the values '0' for the controller's default,
and 1-99 as percentages. Values outside of that range are rejected. The
behaviour of '0' might be confusing, especially for the stop case where
it basically seems to mean '100'.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
---
Documentation/laptops/thinkpad-acpi.txt | 17 ++++
drivers/platform/x86/thinkpad_acpi.c | 173 ++++++++++++++++++++++++++++++++
2 files changed, 190 insertions(+)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 86c5236..97b150a 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -46,6 +46,7 @@ detailed description):
- Fan control and monitoring: fan speed, fan enable/disable
- WAN enable and disable
- UWB enable and disable
+ - Charging control

A compatibility table by model and feature is maintained on the web
site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1352,6 +1353,22 @@ Sysfs notes:
rfkill controller switch "tpacpi_uwb_sw": refer to
Documentation/rfkill.txt for details.

+Charging control
+----------------
+sysfs attribute groups: BAT0, BAT1, and so on, depending on how many batteries
+are supported by the embedded controller.
+
+This feature controls the battery charging process.
+
+battery sysfs attribute: start_charge_thresh
+
+ A percentage value from 1-99%, controlling when charging should start, or
+ 0 for the default value.
+
+battery sysfs attribute: stop_charge_thresh
+
+ A percentage value from 1-99%, controlling when charging should stop, or
+ 0 for the default value.

Multiple Commands, Module Parameters
------------------------------------
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 03ca6c1..66e629e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -323,6 +323,7 @@ static struct {
u32 sensors_pdrv_attrs_registered:1;
u32 sensors_pdev_attrs_registered:1;
u32 hotkey_poll_active:1;
+ u32 battery:1;
} tp_features;

static struct {
@@ -8350,6 +8351,174 @@ static struct ibm_struct fan_driver_data = {
.resume = fan_resume,
};

+
+/*************************************************************************
+ * Battery subdriver
+ */
+
+/* Modify battery_init() if you modify them */
+#define BATTERY_MAX_COUNT 3
+#define BATTERY_MAX_ATTRS 2
+
+static struct battery {
+ char name[3 + 1 + 1];
+ struct attribute_set *set;
+ struct dev_ext_attribute attributes[BATTERY_MAX_ATTRS];
+} batteries[BATTERY_MAX_COUNT];
+
+static int battery_attribute_get_battery(struct device_attribute *attr)
+{
+ return (int) (unsigned long) container_of(attr,
+ struct dev_ext_attribute,
+ attr)->var;
+}
+
+static ssize_t battery_start_charge_thresh_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int bat = battery_attribute_get_battery(attr);
+ int res = -EINVAL;
+ unsigned long value;
+
+ res = kstrtoul(buf, 0, &value);
+ if (res || value > 99)
+ return res ? res : -EINVAL;
+
+ if (!hkey_handle || !acpi_evalf(hkey_handle, &res, "BCCS", "dd",
+ (int) value | (bat << 8)) || res < 0)
+ return -EIO;
+ return count;
+}
+
+static ssize_t battery_stop_charge_thresh_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int bat = battery_attribute_get_battery(attr);
+ int res = -EINVAL;
+ unsigned long value;
+
+ res = kstrtoul(buf, 0, &value);
+ if (res || value > 99)
+ return res ? res : -EINVAL;
+
+ if (!hkey_handle || !acpi_evalf(hkey_handle, &res, "BCSS", "dd",
+ (int) value | (bat << 8)) || res < 0)
+ return -EIO;
+ return count;
+}
+
+static ssize_t battery_start_charge_thresh_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int bat = battery_attribute_get_battery(attr);
+ int value;
+
+ if (!hkey_handle || !acpi_evalf(hkey_handle, &value, "BCTG",
+ "dd", bat))
+ return -EIO;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", value & 0xFF);
+}
+
+static ssize_t battery_stop_charge_thresh_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int bat = battery_attribute_get_battery(attr);
+ int value;
+
+ if (!hkey_handle || !acpi_evalf(hkey_handle, &value, "BCSG",
+ "dd", bat))
+ return -EIO;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", value & 0xFF);
+}
+
+static int __init battery_init(struct ibm_init_struct *iibm)
+{
+ int res;
+ int i;
+ int state;
+
+ vdbg_printk(TPACPI_DBG_INIT,
+ "initializing battery commands subdriver\n");
+
+ TPACPI_ACPIHANDLE_INIT(hkey);
+
+ /* Check whether getter for start threshold exists */
+ tp_features.battery = hkey_handle &&
+ acpi_evalf(hkey_handle, &state, "BCTG", "qdd", 1);
+
+ vdbg_printk(TPACPI_DBG_INIT, "battery commands are %s\n",
+ str_supported(tp_features.battery));
+
+ if (!tp_features.battery)
+ return 1;
+
+ for (i = 0; i < BATTERY_MAX_COUNT; i++) {
+ int j = 0;
+ if (!acpi_evalf(hkey_handle, &state, "BCTG", "qdd", i + 1))
+ continue;
+ /* If the sign bit was set, we could not get the start charge
+ * threshold of that battery. Let's assume that this battery
+ * (and all following ones) do not exist */
+ if (state < 0)
+ break;
+ /* Modify BATTERY_MAX_ATTRS if you add an attribute */
+ batteries[i].attributes[j++] = (struct dev_ext_attribute) {
+ .attr = __ATTR(start_charge_tresh,
+ S_IWUSR | S_IRUGO,
+ battery_start_charge_thresh_show,
+ battery_start_charge_thresh_store),
+ .var = (void *) (unsigned long) (i + 1)
+ };
+ batteries[i].attributes[j++] = (struct dev_ext_attribute) {
+ .attr = __ATTR(stop_charge_tresh,
+ S_IWUSR | S_IRUGO,
+ battery_stop_charge_thresh_show,
+ battery_stop_charge_thresh_store),
+ .var = (void *) (unsigned long) (i + 1)
+ };
+
+ strncpy(batteries[i].name, "BAT", 3);
+ batteries[i].name[3] = '0' + i;
+ batteries[i].name[4] = '\0';
+ batteries[i].set = create_attr_set(j - 1, batteries[i].name);
+
+ for (j = j - 1; j >= 0; j--)
+ add_to_attr_set(batteries[i].set,
+ &batteries[i].attributes[j].attr.attr);
+
+ res = register_attr_set_with_sysfs(batteries[i].set,
+ &tpacpi_pdev->dev.kobj);
+
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+static void battery_exit(void)
+{
+ int i;
+
+ for (i = 0; i < BATTERY_MAX_COUNT; i++) {
+ if (batteries[i].set != NULL) {
+ delete_attr_set(batteries[i].set,
+ &tpacpi_pdev->dev.kobj);
+ }
+ }
+}
+
+static struct ibm_struct battery_driver_data = {
+ .name = "battery",
+ .exit = battery_exit,
+};
+
/****************************************************************************
****************************************************************************
*
@@ -8741,6 +8910,10 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.data = &light_driver_data,
},
{
+ .init = battery_init,
+ .data = &battery_driver_data,
+ },
+ {
.init = cmos_init,
.data = &cmos_driver_data,
},
--
1.8.4.2


\
 
 \ /
  Last update: 2013-11-11 15:21    [W:0.137 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site