lkml.org 
[lkml]   [2013]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: bridge not getting ip since 3.11.5 and 3.4.66
From
On Mon, Nov 11, 2013 at 12:07 PM, Veaceslav Falico <veaceslav@falico.eu> wrote:
> On Mon, Nov 11, 2013 at 11:29 AM, Mark Trompell <mark@foresightlinux.org> wrote:
>> my bridge br0 doesn't get an ip from dhcp anymore after 3.11.5 and 3.4.66,
>> What information would be helpful and required to find out what's going wrong.
>
> CC netdev
>
> First thing would be to provide the network scheme. Do you use vlans?
> Which network
> cards/drivers are you using? Do you use some kind of virtualization?
> Is bonding involved?
>
Actually this is my desktop machine using kvm for a virtual machine
that uses eth0 which is connected to the bridge
which is used as interface for the host.

$ ip addr
2. eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast
master br0 qlen 1000
...
3. br0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
...

Anything else?

Greetings
Mark


\
 
 \ /
  Last update: 2013-11-11 14:21    [W:0.104 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site