lkml.org 
[lkml]   [2013]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] mm: add strictlimit knob
From
Date
"strictlimit" feature was introduced to enforce per-bdi dirty limits for
FUSE which sets bdi max_ratio to 1% by default:

http://www.http.com//article.gmane.org/gmane.linux.kernel.mm/105809

However the feature can be useful for other relatively slow or untrusted
BDIs like USB flash drives and DVD+RW. The patch adds a knob to enable the
feature:

echo 1 > /sys/class/bdi/X:Y/strictlimit

Being enabled, the feature enforces bdi max_ratio limit even if global (10%)
dirty limit is not reached. Of course, the effect is not visible until
max_ratio is decreased to some reasonable value.

Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
---
mm/backing-dev.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)

diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index ce682f7..4ee1d64 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -234,11 +234,46 @@ static ssize_t stable_pages_required_show(struct device *dev,
}
static DEVICE_ATTR_RO(stable_pages_required);

+static ssize_t strictlimit_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct backing_dev_info *bdi = dev_get_drvdata(dev);
+ unsigned int val;
+ ssize_t ret;
+
+ ret = kstrtouint(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ switch (val) {
+ case 0:
+ bdi->capabilities &= ~BDI_CAP_STRICTLIMIT;
+ break;
+ case 1:
+ bdi->capabilities |= BDI_CAP_STRICTLIMIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+static ssize_t strictlimit_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ struct backing_dev_info *bdi = dev_get_drvdata(dev);
+
+ return snprintf(page, PAGE_SIZE-1, "%d\n",
+ !!(bdi->capabilities & BDI_CAP_STRICTLIMIT));
+}
+static DEVICE_ATTR_RW(strictlimit);
+
static struct attribute *bdi_dev_attrs[] = {
&dev_attr_read_ahead_kb.attr,
&dev_attr_min_ratio.attr,
&dev_attr_max_ratio.attr,
&dev_attr_stable_pages_required.attr,
+ &dev_attr_strictlimit.attr,
NULL,
};
ATTRIBUTE_GROUPS(bdi_dev);


\
 
 \ /
  Last update: 2013-11-01 16:01    [W:0.121 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site