lkml.org 
[lkml]   [2013]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 2/3] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
Hi Mark, Stephen and other DT maintainers?

The 1/3 had already been acked by Mark, and please have a further look
at this patch 2/3.
The DMA maintainer Vinod needs ack for the DT related patches so that
he can take all this patch set.

On 09/26/2013 05:33 PM, hongbo.zhang@freescale.com wrote:
> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>
> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
> the device tree nodes for them.
>
> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
> ---
> .../devicetree/bindings/powerpc/fsl/dma.txt | 70 +++++++++++++++++
> arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 4 +-
> arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 82 ++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 82 ++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
> 5 files changed, 238 insertions(+), 4 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> index 0584168..7fc1b01 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> @@ -128,6 +128,76 @@ Example:
> };
> };
>
> +** Freescale Elo3 DMA Controller
> + DMA controller which has same function as EloPlus except that Elo3 has 8
> + channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
> + series chips, such as t1040, t4240, b4860.
> +
> +Required properties:
> +
> +- compatible : must include "fsl,elo3-dma"
> +- reg : contains two entries for DMA General Status Registers,
> + i.e. DGSR0 which includes status for channel 1~4, and
> + DGSR1 for channel 5~8
> +- ranges : describes the mapping between the address space of the
> + DMA channels and the address space of the DMA controller
> +
> +- DMA channel nodes:
> + - compatible : must include "fsl,eloplus-dma-channel"
> + - reg : DMA channel specific registers
> + - interrupts : interrupt specifier for DMA channel IRQ
> + - interrupt-parent : optional, if needed for interrupt mapping
> +
> +Example:
> +dma@100300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,elo3-dma";
> + reg = <0x100300 0x4>,
> + <0x100600 0x4>;
> + ranges = <0x0 0x100100 0x500>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + interrupts = <28 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + interrupts = <29 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + interrupts = <30 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + interrupts = <31 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + interrupts = <76 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + interrupts = <77 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + interrupts = <78 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + interrupts = <79 2 0 0>;
> + };
> +};
> +
> Note on DMA channel compatible properties: The compatible property must say
> "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
> driver (fsldma). Any DMA channel used by fsldma cannot be used by another
> diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> index 7399154..ea53ea1 100644
> --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
> @@ -223,13 +223,13 @@
> reg = <0xe2000 0x1000>;
> };
>
> -/include/ "qoriq-dma-0.dtsi"
> +/include/ "elo3-dma-0.dtsi"
> dma@100300 {
> fsl,iommu-parent = <&pamu0>;
> fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
> };
>
> -/include/ "qoriq-dma-1.dtsi"
> +/include/ "elo3-dma-1.dtsi"
> dma@101300 {
> fsl,iommu-parent = <&pamu0>;
> fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
> diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
> new file mode 100644
> index 0000000..3c210e0
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
> @@ -0,0 +1,82 @@
> +/*
> + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ]
> + *
> + * Copyright 2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma0: dma@100300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,elo3-dma";
> + reg = <0x100300 0x4>,
> + <0x100600 0x4>;
> + ranges = <0x0 0x100100 0x500>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + interrupts = <28 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + interrupts = <29 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + interrupts = <30 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + interrupts = <31 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + interrupts = <76 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + interrupts = <77 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + interrupts = <78 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + interrupts = <79 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
> new file mode 100644
> index 0000000..cccf3bb
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
> @@ -0,0 +1,82 @@
> +/*
> + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ]
> + *
> + * Copyright 2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma1: dma@101300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,elo3-dma";
> + reg = <0x101300 0x4>,
> + <0x101600 0x4>;
> + ranges = <0x0 0x101100 0x500>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + interrupts = <32 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + interrupts = <33 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + interrupts = <34 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + interrupts = <35 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + interrupts = <80 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + interrupts = <81 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + interrupts = <82 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + interrupts = <83 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index bd611a9..ec95c60 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -387,8 +387,8 @@
> reg = <0xea000 0x4000>;
> };
>
> -/include/ "qoriq-dma-0.dtsi"
> -/include/ "qoriq-dma-1.dtsi"
> +/include/ "elo3-dma-0.dtsi"
> +/include/ "elo3-dma-1.dtsi"
>
> /include/ "qoriq-espi-0.dtsi"
> spi@110000 {





\
 
 \ /
  Last update: 2013-10-08 05:41    [W:0.142 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site