lkml.org 
[lkml]   [2013]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 11/12] pwm-backlight: Add power supply support
Date
Backlights require a power supply to work properly. This commit adds a
regulator to power up and power down the backlight.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- make regulator mandatory and update commit message accordingly

.../devicetree/bindings/video/backlight/pwm-backlight.txt | 2 ++
drivers/video/backlight/pwm_bl.c | 13 +++++++++++++
2 files changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
index 72810cc..764db86 100644
--- a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -10,6 +10,7 @@ Required properties:
last value in the array represents a 100% duty cycle (brightest).
- default-brightness-level: the default brightness level (index into the
array defined by the "brightness-levels" property)
+ - power-supply: regulator for supply voltage

Optional properties:
- pwm-names: a list of names for the PWM devices specified in the
@@ -29,5 +30,6 @@ Example:
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;

+ power-supply = <&vdd_bl_reg>;
enable-gpios = <&gpio 58 0>;
};
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index cdef4a3..eec6c98 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -21,6 +21,7 @@
#include <linux/err.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>

struct pwm_bl_data {
@@ -30,6 +31,7 @@ struct pwm_bl_data {
unsigned int lth_brightness;
unsigned int *levels;
bool enabled;
+ struct regulator *power_supply;
int enable_gpio;
unsigned long enable_gpio_flags;
int (*notify)(struct device *,
@@ -60,6 +62,10 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness,

pwm_config(pb->pwm, duty_cycle, pb->period);

+ err = regulator_enable(pb->power_supply);
+ if (err < 0)
+ dev_err(pb->dev, "failed to enable power supply\n");
+
if (gpio_is_valid(pb->enable_gpio)) {
if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW)
gpio_set_value(pb->enable_gpio, 0);
@@ -86,6 +92,7 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
gpio_set_value(pb->enable_gpio, 0);
}

+ regulator_disable(pb->power_supply);
pb->enabled = false;
}

@@ -268,6 +275,12 @@ static int pwm_backlight_probe(struct platform_device *pdev)
}
}

+ pb->power_supply = devm_regulator_get(&pdev->dev, "power");
+ if (IS_ERR(pb->power_supply)) {
+ ret = PTR_ERR(pb->power_supply);
+ goto err_gpio;
+ }
+
pb->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(pb->pwm)) {
dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
--
1.8.4


\
 
 \ /
  Last update: 2013-10-07 14:01    [W:0.064 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site