lkml.org 
[lkml]   [2013]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
Hi Benoit,

Thanks a lot for fixing it.

On Thursday 03 October 2013 07:09 PM, Benoit Cousson wrote:
> Hi Keerthy,
>
> On 11/09/2013 07:30, Keerthy wrote:
>> On Tuesday 10 September 2013 12:51 AM, Nishanth Menon wrote:
>>> On 08/26/2013 12:36 AM, Keerthy wrote:
>>>> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>>>>
>>>> It is based on top of:
>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>>>>
>>>> Documentation: Documentation/devicetree/bindings/mfd/palmas.txt
>>>> Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>>>>
>>>> Boot Tested on DRA7 d1 Board.
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>>> ---
>>>> arch/arm/boot/dts/dra7-evm.dts | 118
>>>> ++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 118 insertions(+)
>>>>
>>>> Index: linux/arch/arm/boot/dts/dra7-evm.dts
>>>> ===================================================================
>>>> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>>> 09:57:52.496173554 +0530
>>>> +++ linux/arch/arm/boot/dts/dra7-evm.dts 2013-08-26
>>>> 10:38:44.995414695 +0530
>>>> @@ -93,6 +93,119 @@
>>>> pinctrl-names = "default";
>>>> pinctrl-0 = <&i2c1_pins>;
>>>> clock-frequency = <400000>;
>>>> +
>>>> + tps659038: tps659038@58 {
>>>> + compatible = "ti,tps659038";
>>>> + reg = <0x58>;
>>>> +
>>>> + tps659038_pmic {
>>>> + compatible = "ti,tps659038-pmic";
>>>> +
>>>> + regulators {
>>>> + smps123_reg: smps123 {
>>>> + /* VDD_MPU */
>>>> + regulator-name = "smps123";
>>>> + regulator-min-microvolt = < 850000>;
>>>> + regulator-max-microvolt = <1250000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps45_reg: smps45 {
>>>> + /* VDD_DSPEVE */
>>>> + regulator-name = "smps45";
>>>> + regulator-min-microvolt = < 850000>;
>>>> + regulator-max-microvolt = <1150000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps6_reg: smps6 {
>>>> + /* VDD_GPU - over VDD_SMPS6 */
>>>> + regulator-name = "smps6";
>>>> + regulator-min-microvolt = <850000>;
>>>> + regulator-max-microvolt = <12500000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps7_reg: smps7 {
>>>> + /* CORE_VDD */
>>>> + regulator-name = "smps7";
>>>> + regulator-min-microvolt = <850000>;
>>>> + regulator-max-microvolt = <1030000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps8_reg: smps8 {
>>>> + /* VDD_IVAHD */
>>>> + regulator-name = "smps8";
>>>> + regulator-min-microvolt = < 850000>;
>>>> + regulator-max-microvolt = <1250000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + smps9_reg: smps9 {
>>>> + /* VDDS1V8 */
>>>> + regulator-name = "smps9";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo1_reg: ldo1 {
>>>> + /* LDO1_OUT --> SDIO */
>>>> + regulator-name = "ldo1";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo2_reg: ldo2 {
>>>> + /* VDD_RTCIO */
>>>> + /* LDO2 -> VDDSHV5, LDO2 also goes to
>>>> CAN_PHY_3V3 */
>>>> + regulator-name = "ldo2";
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo3_reg: ldo3 {
>>>> + /* VDDA_1V8_PHY */
>>>> + regulator-name = "ldo3";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldo9_reg: ldo9 {
>>>> + /* VDD_RTC */
>>>> + regulator-name = "ldo9";
>>>> + regulator-min-microvolt = <1050000>;
>>>> + regulator-max-microvolt = <1050000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldoln_reg: ldoln {
>>>> + /* VDDA_1V8_PLL */
>>>> + regulator-name = "ldoln";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + ldousb_reg: ldousb {
>>>> + /* VDDA_3V_USB: VDDA_USBHS33 */
>>>> + regulator-name = "ldousb";
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
> Nit: Extra blank line not needed.
>
>>>> + };
>>>> + };
>>>> + };
>>>> };
> Nit: You have an extra level on indentation not needed.
>
>>>> &i2c2 {
>>>>
>>> Acked-by: Nishanth Menon <nm@ti.com>
> Beside the two minors nits, the patch looks good to me.
>
> Since, you've been waiting for some time for it, I fixed it myself and pulled it.
> I even fixed the changelog... Lucky you :-)
>
> You can check the updated version below.
>
> Sorry for the delay.
>
> Thanks,
> Benoit
>
> ---
> From 3b8f02a2df475c7a48e12eb1911c014f8060b167 Mon Sep 17 00:00:00 2001
> From: Keerthy <j-keerthy@ti.com>
> Date: Mon, 26 Aug 2013 11:06:51 +0530
> Subject: [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes
>
> Add DT nodes for TPS659038 PMIC on DRA7 boards.
>
> It is based on top of:
> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>
> Documentation:
> - Documentation/devicetree/bindings/mfd/palmas.txt
> - Documentation/devicetree/bindings/regulator/palmas-pmic.txt
>
> Boot Tested on DRA7 d1 Board.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Acked-by: Nishanth Menon <nm@ti.com>
> [bcousson@baylibre.com: Fix indentation and changelog]
> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 112 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 112 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index ca5dab2..fbbe406 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -93,6 +93,118 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
> clock-frequency = <400000>;
> +
> + tps659038: tps659038@58 {
> + compatible = "ti,tps659038";
> + reg = <0x58>;
> +
> + tps659038_pmic {
> + compatible = "ti,tps659038-pmic";
> +
> + regulators {
> + smps123_reg: smps123 {
> + /* VDD_MPU */
> + regulator-name = "smps123";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps45_reg: smps45 {
> + /* VDD_DSPEVE */
> + regulator-name = "smps45";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1150000>;
> + regulator-boot-on;
> + };
> +
> + smps6_reg: smps6 {
> + /* VDD_GPU - over VDD_SMPS6 */
> + regulator-name = "smps6";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <12500000>;
> + regulator-boot-on;
> + };
> +
> + smps7_reg: smps7 {
> + /* CORE_VDD */
> + regulator-name = "smps7";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1030000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps8_reg: smps8 {
> + /* VDD_IVAHD */
> + regulator-name = "smps8";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-boot-on;
> + };
> +
> + smps9_reg: smps9 {
> + /* VDDS1V8 */
> + regulator-name = "smps9";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo1_reg: ldo1 {
> + /* LDO1_OUT --> SDIO */
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo2_reg: ldo2 {
> + /* VDD_RTCIO */
> + /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo3_reg: ldo3 {
> + /* VDDA_1V8_PHY */
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + };
> +
> + ldo9_reg: ldo9 {
> + /* VDD_RTC */
> + regulator-name = "ldo9";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-boot-on;
> + };
> +
> + ldoln_reg: ldoln {
> + /* VDDA_1V8_PLL */
> + regulator-name = "ldoln";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldousb_reg: ldousb {
> + /* VDDA_3V_USB: VDDA_USBHS33 */
> + regulator-name = "ldousb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> };
>
> &i2c2 {
Looks good. Thanks once again.


\
 
 \ /
  Last update: 2013-10-04 10:41    [W:0.069 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site