lkml.org 
[lkml]   [2013]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 02/10] spmi: Linux driver framework for SPMI
On Tue, Oct 29, 2013 at 09:52:15AM -0700, Stephen Boyd wrote:
> On 10/28/13 11:12, Josh Cartwright wrote:
> > diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
> > new file mode 100644
> > index 0000000..a03835f
> > --- /dev/null
> > +++ b/drivers/spmi/Kconfig
> > @@ -0,0 +1,9 @@
> > +#
> > +# SPMI driver configuration
> > +#
> > +menuconfig SPMI
> > + bool "SPMI support"
>
> Can we do tristate?

I don't think there is any reason why we can't do tristate here. I do
foresee in the future, however, that we'll run into ordering/dependency
problems when we get the regulator drivers in place.

I suppose we'll wait until we get there to deal with those.

> > + help
> > + SPMI (System Power Management Interface) is a two-wire
> > + serial interface between baseband and application processors
> > + and Power Management Integrated Circuits (PMIC).
> > diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
> > new file mode 100644
> > index 0000000..0780bd4
> > --- /dev/null
> > +++ b/drivers/spmi/spmi.c
> > @@ -0,0 +1,491 @@
> > +/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#include <linux/kernel.h>
> > +#include <linux/errno.h>
> > +#include <linux/idr.h>
> > +#include <linux/slab.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/spmi.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +
> > +#include <dt-bindings/spmi/spmi.h>
> > +
> > +static DEFINE_MUTEX(ctrl_idr_lock);
> > +static DEFINE_IDR(ctrl_idr);
> > +
> > +static void spmi_dev_release(struct device *dev)
> > +{
> > + struct spmi_device *sdev = to_spmi_device(dev);
> > + kfree(sdev);
> > +}
> > +
> > +static struct device_type spmi_dev_type = {
> > + .release = spmi_dev_release,
>
> const?
>
[..]
> > +static struct device_type spmi_ctrl_type = {
>
>
> const?

Yep. Thanks.

[..]
> > +int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf)
> > +{
> > + /* 5-bit register address */
> > + if (addr > 0x1F)
>
> Perhaps 0x1f should be a #define.

Is 0x1F with the comment above it not clear enough?

> > + return -EINVAL;
> > +
> > + return spmi_read_cmd(sdev->ctrl, SPMI_CMD_READ, sdev->usid, addr, 0,
> > + buf);
> > +}
> > +EXPORT_SYMBOL_GPL(spmi_register_read);
> > +
> [...]
> > +struct spmi_controller *spmi_controller_alloc(struct device *parent,
> > + size_t size)
> > +{
> > + struct spmi_controller *ctrl;
> > + int id;
> > +
> > + if (WARN_ON(!parent))
> > + return NULL;
> > +
> > + ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
> > + if (!ctrl)
> > + return NULL;
> > +
> > + device_initialize(&ctrl->dev);
> > + ctrl->dev.type = &spmi_ctrl_type;
> > + ctrl->dev.bus = &spmi_bus_type;
> > + ctrl->dev.parent = parent;
> > + ctrl->dev.of_node = parent->of_node;
> > + spmi_controller_set_drvdata(ctrl, &ctrl[1]);
> > +
> > + idr_preload(GFP_KERNEL);
> > + mutex_lock(&ctrl_idr_lock);
> > + id = idr_alloc(&ctrl_idr, ctrl, 0, 0, GFP_NOWAIT);
> > + mutex_unlock(&ctrl_idr_lock);
> > + idr_preload_end();
>
> This can just be:
>
> mutex_lock(&ctrl_idr_lock);
> id = idr_alloc(&ctrl_idr, ctrl, 0, 0, GFP_KERNEL);
> mutex_unlock(&ctrl_idr_lock);

Actually, I'm wondering if it's just easier to leverage the simpler
ida_simple_* APIs instead.

> > +
> > + if (id < 0) {
> > + dev_err(parent,
> > + "unable to allocate SPMI controller identifier.\n");
> > + spmi_controller_put(ctrl);
> > + return NULL;
> > + }
> > +
> > + ctrl->nr = id;
> > + dev_set_name(&ctrl->dev, "spmi-%d", id);
> > +
> > + dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
> > + return ctrl;
> > +}
> > +EXPORT_SYMBOL_GPL(spmi_controller_alloc);
> > +
> > +static int of_spmi_register_devices(struct spmi_controller *ctrl)
> > +{
> > + struct device_node *node;
> > + int err;
> > +
> > + dev_dbg(&ctrl->dev, "of_spmi_register_devices\n");
>
> Could be
>
> dev_dbg(&ctrl->dev, "%s", __func__);
>
> so that function renaming is transparent.

Some of these dev_dbg()'s (like this one) can probably be just be
removed, especially because we have an additional dev_dbg() right below
this one...

> > +
> > + if (!ctrl->dev.of_node)
> > + return -ENODEV;
> > +
> > + dev_dbg(&ctrl->dev, "looping through children\n");
> > +
> > + for_each_available_child_of_node(ctrl->dev.of_node, node) {
> > + struct spmi_device *sdev;
> > + u32 reg[2];
> > +
> > + dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
> > +
> > + err = of_property_read_u32_array(node, "reg", reg, 2);
> > + if (err) {
> > + dev_err(&ctrl->dev,
> > + "node %s does not have 'reg' property\n",
> > + node->full_name);
> > + continue;
> > + }
> > +
> > + if (reg[1] != SPMI_USID) {
> > + dev_err(&ctrl->dev,
> > + "node %s contains unsupported 'reg' entry\n",
> > + node->full_name);
> > + continue;
> > + }
> > +
> > + if (reg[0] > 0xF) {
>
> Perhaps call this MAX_USID?

Sure.

> > + dev_err(&ctrl->dev,
> > + "invalid usid on node %s\n",
> > + node->full_name);
> > + continue;
> > + }
> > +
> [...]
> > diff --git a/include/linux/spmi.h b/include/linux/spmi.h
> > new file mode 100644
> > index 0000000..29cf0c9
> > --- /dev/null
> > +++ b/include/linux/spmi.h
> > @@ -0,0 +1,342 @@
> > +/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#ifndef _LINUX_SPMI_H
> > +#define _LINUX_SPMI_H
> > +
> > +#include <linux/types.h>
> > +#include <linux/device.h>
> > +#include <linux/mod_devicetable.h>
> > +
> > +/* Maximum slave identifier */
> > +#define SPMI_MAX_SLAVE_ID 16
> > +
> > +/* SPMI Commands */
> > +#define SPMI_CMD_EXT_WRITE 0x00
> > +#define SPMI_CMD_RESET 0x10
> > +#define SPMI_CMD_SLEEP 0x11
> > +#define SPMI_CMD_SHUTDOWN 0x12
> > +#define SPMI_CMD_WAKEUP 0x13
> > +#define SPMI_CMD_AUTHENTICATE 0x14
> > +#define SPMI_CMD_MSTR_READ 0x15
> > +#define SPMI_CMD_MSTR_WRITE 0x16
> > +#define SPMI_CMD_TRANSFER_BUS_OWNERSHIP 0x1A
> > +#define SPMI_CMD_DDB_MASTER_READ 0x1B
> > +#define SPMI_CMD_DDB_SLAVE_READ 0x1C
> > +#define SPMI_CMD_EXT_READ 0x20
> > +#define SPMI_CMD_EXT_WRITEL 0x30
> > +#define SPMI_CMD_EXT_READL 0x38
> > +#define SPMI_CMD_WRITE 0x40
> > +#define SPMI_CMD_READ 0x60
> > +#define SPMI_CMD_ZERO_WRITE 0x80
> > +
> > +/**
> > + * Client/device handle (struct spmi_device):
>
> This isn't kernel-doc format.
[..]
> > + * spmi_controller_alloc: Allocate a new SPMI controller
>
> There should be a dash here instead of colon.
>
[..]
> > +static inline void spmi_controller_put(struct spmi_controller *ctrl)
> > +{
> > + if (ctrl)
> > + put_device(&ctrl->dev);
> > +}
>
> This function is missing documentation.
>
[..]
> > +/**
> > + * spmi_register_read() - register read
>
> This is right but then it's not consistent. These functions have ()
> after them but higher up we don't have that.
>
> Usually the prototypes aren't documented because people use tags and
> such to go to the definition of the function. I would prefer we put the
> documentation near the implementation so that 1) this file gives a high
> level overview of the API and 2) I don't have to double jump with tags
> to figure out what to pass to these functions.

Will move/clean these up, thanks.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2013-10-30 21:01    [W:0.143 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site