lkml.org 
[lkml]   [2013]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 54/57] drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
Date
3.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 58d327da9721f7a0f6e46c8dfa5cc5546fd7078a upstream.

These asics seem to use a mix of the DCE2.x and
DCE3.2 audio interfaces despite what the register spec
says.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=69729
https://bugs.freedesktop.org/show_bug.cgi?id=69671

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpu/drm/radeon/r600_hdmi.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -257,10 +257,7 @@ void r600_audio_set_dto(struct drm_encod
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
- if (ASIC_IS_DCE3(rdev)) {
- /* according to the reg specs, this should DCE3.2 only, but in
- * practice it seems to cover DCE3.0 as well.
- */
+ if (ASIC_IS_DCE32(rdev)) {
if (dig->dig_encoder == 0) {
dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
@@ -276,8 +273,21 @@ void r600_audio_set_dto(struct drm_encod
WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo);
WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
}
+ } else if (ASIC_IS_DCE3(rdev)) {
+ /* according to the reg specs, this should DCE3.2 only, but in
+ * practice it seems to cover DCE3.0/3.1 as well.
+ */
+ if (dig->dig_encoder == 0) {
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+ WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+ } else {
+ WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100);
+ WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100);
+ WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
+ }
} else {
- /* according to the reg specs, this should be DCE2.0 and DCE3.0 */
+ /* according to the reg specs, this should be DCE2.0 and DCE3.0/3.1 */
WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
AUDIO_DTO_MODULE(clock / 10));
}



\
 
 \ /
  Last update: 2013-10-03 07:21    [W:0.554 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site